FTDI Chip 500mm, Male USB to Female Receptacle, Serial Cable Assembly

  • RS Stock No. 741-7076
  • Mfr. Part No. C232HM-DDHSL-0
  • Manufacturer FTDI Chip
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

USB 2.0 Hi-Speed to MPSSE Cable, FTDI Chip

The USB 2.0 Hi-Speed to MPSSE cables contain a small internal electronic circuit board, utilising the FTDI FT232H, encapsulated into the USB connector end of the cable. This chip handles all the USB signalling and protocols. The cables provide a fast, simple way to connect devices with 3.3 or 5V digital interfaces to USB.

Based on the single chip USB Hi-Speed FT232H device
USB 2.0 Hi-Speed (480Mbits/Second) and Full Speed (12Mbits/Second) compatible
Entire USB protocol handled on the chip – No USB-specific firmware programming required
USB Type A connector for direct connection to a host or hub
USB bus powered
Fully assisted hardware or X-On / X-Off software handshaking
Synchronous Serial (MPSSE) data rates of up to 30Mbps on JTAG, SPI and I²C
1kByte receive and transmit buffers for high data throughput
Transmit and receive LED drive signals
Adjustable receive buffer timeout
Support for USB suspend and resume
Low operating and USB suspend current Low USB bandwidth consumption
UHCI / OHCI / EHCI host controller compatible
Operating temperature range: -40 to +85°C
Cable length: 1800mm
FTDI’s royalty-free D2XX drivers eliminate the requirement for USB driver development in most cases

Specifications
Attribute Value
Connector A Male USB
Connector B Female Receptacle
Length 500mm
Cable Type USB
390 In Global stock for delivery within 4 - 8 working days
Price Each
PHP 2,383.52
(exc. VAT)
PHP 2,669.54
(inc. VAT)
units
Per Unit
1 - 9
PHP2,383.52
10 - 49
PHP2,382.88
50 +
PHP2,264.71
Related Products
The FTDI Chip TTL-232x USB to Serial UART ...
Description:
The FTDI Chip TTL-232x USB to Serial UART (TTL level) converter cables provide a simple and fast way to convert microcontroller UART serial I/O to USB. The TTL-232R contains a small circuit board which includes the FT232x chip. Encapsulated in ...
Designed to replace an existing DE9 connector, (male ...
Description:
Designed to replace an existing DE9 connector, (male or female) RS-232/TTL UART connection with a drop-in USB replacement connection. Miniaturised modules which closely resemble a DE9 connector for PCB mountingUSB mini-B socket connectorThe modules contain a USB-Serial bridge IC and ...
The HUB Interface Expansion Module for the Raspberry ...
Description:
The HUB Interface Expansion Module for the Raspberry Pi is ideal if you want to expand the number of downstream port interfaces on your Pi board.What does the HUB Interface Expansion Module feature?•Dual Channel USB/UART/245FIFO/SPI/I2C/JTAG/GPIO interface converter•USB 2.0 hub chip ...
The TTL-234X-5V-WE and TTL-234X-3V3-WE cables are both un-terminated, ...
Description:
The TTL-234X-5V-WE and TTL-234X-3V3-WE cables are both un-terminated, they are bare and tinned wires. The difference between the two cables is that the TTL-234X-5V-WE operates at +5V levels (signals and power supply) and the TTL-234X-3V3-WE operates at +3.3V levels (signals ...