Hirose DX Series, Male 20 Pin Straight Cable Mount SCSI Connector 1.27mm Pitch, Jack Screw, Screw

  • RS Stock No. 162-5719
  • Mfr. Part No. DX-20-CV1
  • Manufacturer Hirose
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Hirose original 1.27mm pitch High-Density I/O connectors

1.27mm contact spacing conserves valuable board space and permits ultra-high density designs
Bellow contacts create smooth and precise mating and unmating
Unique shell design assures first make/mast break grounding and overall noise protection
IDC termination allows quick and low cost termination to AWG #28 and #30 wires
Back Shell and receptacle shell are made of diecast zinc alloy to reduce the penetration of external EMI noise
Easy to use 'One-Touch' and 'Screw' locking mechanisms assure quick and easy 'positive' closures every time
Termination method is available in IDC, Soldering, Right Angle Dip, Straight Dip and SMT
DX with 3 cavities and 2 cavities for Co-axial contacts are newly introduced to meet the needs of high speed data transmission
Shielded Plug-in type for interface between 2 Units available

Specifications
Attribute Value
Gender Male
Number of Contacts 20
Body Orientation Straight
Mounting Type Cable Mount
Contact Material Copper Alloy
Contact Plating Gold
Housing Material PBT
Pitch 1.27mm
Current Rating 500mA
Voltage Rating 125 V ac
Latch Type Screw
Termination Method Jack Screw
Series DX
Length 34.2mm
Maximum Operating Temperature +85°C
Minimum Operating Temperature -55°C
Depth 11.5mm
Width 32mm
21 In Global stock for delivery within 4 - 8 working days
Price Each
PHP 767.03
(exc. VAT)
PHP 859.07
(inc. VAT)
units
Per Unit
1 - 4
PHP767.03
5 - 9
PHP691.72
10 +
PHP540.80
Related Products
Solid metal hoods with short and long jack ...
Description:
Solid metal hoods with short and long jack screws and anti-kink sleevingThe two halves of the hood lock into one anotherJack screws can be retrofittedOption of fitting hoods universally using locking mechanisms (100–7490)Ø 6.5 cable — 14 mm for flat ...
Plastic hoods for D connectors, complete with quick ...
Description:
Plastic hoods for D connectors, complete with quick assembly strain relief grommets and full metal jack screws. Fits most types of D connectors, including IDCCable diameter 4-12mmMaterial UL 94-VØ Halogen free ABS.
Shielded EMI/RFI metal hood for use with d-type ...
Description:
Shielded EMI/RFI metal hood for use with d-type subminiature connectors. These shielded metal hoods are made from die cast zinc with a nickel plating, have a straight cable exit and are supplied with 2 die cast zinc cable clamps for ...
Thermoplastic backshell for use with D-subminiature connectors. These ...
Description:
Thermoplastic backshell for use with D-subminiature connectors. These backshells have a clam type shell with a 180° cable exit angle and accept a cable insulation diameter range of 3.00 to 11mm. Each d-subminiature backshell consists of the following components:2 x ...