RS PRO Electrolytic, Magnetic 22 mm Compression Scale Inhibitor, 1.08L/s, 12 bar

  • RS Stock No. 738-2734
  • Manufacturer RS PRO
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): GB
Product Details

CalGlow Scale Inhibitor

The CalGlow scale inhibitor combined magnetic & electrolytic dual purpose unit can be installed on both hot and cold water lines to prevent limescale from forming.
The unit can be used on 22mm pipework.

Maximum temperature: 100 °C

Note

This unit does not require earth bonding.
Cut pipework to suit length of unit.

Specifications
Attribute Value
Connection 22 mm Compression
Maximum Flow Rate 1.08L/s
Maximum Working Pressure 12 bar
WRAS Approval Yes
Connection Size 22mm
Thread Standard or Connection Type Compression
10 In Global stock for delivery within 4 - 8 working days
Price Each
PHP 3,470.84
(exc. VAT)
PHP 3,887.34
(inc. VAT)
units
Per Unit
1 - 5
PHP3,470.84
6 +
PHP2,787.35
Related Products
The RS PRO Electromag water conditioner provides industry ...
Description:
The RS PRO Electromag water conditioner provides industry with a cost-effective solution for treating problems with hard scale. Electromagnetic technology effectively reduces existing limescale, preventing new scale build-up, whilst enhancing heat transfer efficiency. The RS PRO Electromag units are available ...
The CRC Industries sugar remover and inhibitor dissolves ...
Description:
The CRC Industries sugar remover and inhibitor dissolves fondants and sugars from a variety of surfaces in the food processing industry. It leaves a light, durable film which lubricates and protects against corrosion. Appearance : Slightly viscous, hazy liquidOdour : ...
Plugged into the main electrical 230 volt supply ...
Description:
Plugged into the main electrical 230 volt supply the electronic scale inhibitor draws power to the main control unit where it is passed through a 12v transformer and out to the aerial wires, wound around the pipework. Installed on incoming ...
This scale inhibitor unit which should be installed ...
Description:
This scale inhibitor unit which should be installed on cold water lines to prevent limescale from forming and to prolong the life of the system elements.The unit is supplied with fittings for a standard 15mm installation.