Schneider Electric Two Hand Control Safety Relay, 24V ac/dc, 2 Safety Contacts

Prevent accidental operation of dangerous machinery with this safety relay from Schneider Electric. It's designed for use with two-hand control stations, which ensure that you're clear of hazardous moving parts before equipment starts up. As the unit has a low power consumption of 0.8W or less, it's an energy-efficient option. Two LEDs make it easy to monitor its operating status at a glance. For ease of installation, this relay is designed for mounting on a DIN rail.

• Enclosure has an IP40 rating, meaning it's finger-safe and protected against objects bigger than 1mm
• Wide operating temperature range between -25°C and +55°C for use in demanding environments
• Captive screw clamp terminals for secure wiring
• Supply voltage of 24V AC/DC for use in low-power systems

• Manufacturing machinery
• Factory automation systems
• Safety guards and gates

To activate a machine using a two-hand control station, you must simultaneously push both buttons. If you release one of the buttons during operation, the safety relay will stop the attached equipment immediately.