FAG 33014 70mm I.D Taper Roller Bearing, 110mm O.D
- RS Stock No.:
- 190-8381
- Mfr. Part No.:
- 33014
- Manufacturer:
- FAG
Temporarily out of stock - back order for despatch 31/05/2024, delivery within 10 working days from desptach date
Added
Price Each
PHP7,216.19
(exc. VAT)
PHP8,082.13
(inc. VAT)
| Units | Per Unit |
| 1 + | PHP7,216.19 |
- RS Stock No.:
- 190-8381
- Mfr. Part No.:
- 33014
- Manufacturer:
- FAG
Technical data sheets
Legislation and Compliance
Product Details
High radial loads occur
High axial loads act on one side
Combined loads must be supported (radial and axial forces acting simultaneously)
Precise axial guidance of the shaft is required (locating bearing function)
The bearing arrangement must have very high axial rigidity
The bearing position is operated clearance-free or under preload (single bearings are adjusted against each other)
High running accuracy is required
The load carrying capacity of angular contact ball bearings is no longer sufficient and the higher speed suitability of angular contact ball bearings is not required
The bearings are not required to compensate misalignments
The design objective comprises compact, rigid and economical bearing arrangements with a high load carrying capacity
High axial loads act on one side
Combined loads must be supported (radial and axial forces acting simultaneously)
Precise axial guidance of the shaft is required (locating bearing function)
The bearing arrangement must have very high axial rigidity
The bearing position is operated clearance-free or under preload (single bearings are adjusted against each other)
High running accuracy is required
The load carrying capacity of angular contact ball bearings is no longer sufficient and the higher speed suitability of angular contact ball bearings is not required
The bearings are not required to compensate misalignments
The design objective comprises compact, rigid and economical bearing arrangements with a high load carrying capacity
Specifications
Attribute | Value |
|---|---|
| Inside Diameter | 70mm |
| Outside Diameter | 110mm |
| Roller Bearing Type | Taper |
| Race Width | 31mm |
| Bore Type | Tapered |
| Static Load Rating | 223000N |
| Cage Material | Sheet Steel |
| Number of Rows | 1 |
| Dynamic Load Rating | 136000N |
| End Type | Open |
| Fatigue Limit Load | 29500N |