Eccel Technology Ltd RFID Reader OEM-MICODE-USB (000128), Reader/Writer

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): GB
Product Details

OEM-MICODE RFID Reader Boards

The OEM-MICODE Reader Boards are complete Read/Write system for ISO14443A Mifare 1k, Mifare 4k, Ultralight and ICODE. The Boards have an integrated PCB track antenna, LEDs, TTL serial and I/O interface. Also included on the board is power supply filtering, antenna-trimming capacitor and LEDs for visual indication of card acceptance. The J2 connector also allows the OEMMICODE board to be reprogrammed with custom firmware.
Two versions are available:
RS232 connector requiring 5 V supply (RS 1262182)
USB using USB bus for power supply (RS 1262181)

Features:

• Complete “plug-and-go” RFID Read / Write system • Integrated PCB antenna, LEDS, RS232 or USB interface.
• Supports Mifare 1k, 4k, Ultralight and ICODE (including contactless read/write to Mifare
ProX, SmartMX / JCOP cards)
• Average current consumption down to 100 micro Amps even when fully active
• Auxiliary output options for automatic data output as serial or Wiegand protocol

Note

DESFire and Mifare PLUS cards are supported for serial number acquisition only.

RFID - Eccel

Specifications
Attribute Value
Component Type Reader/Writer
Supported Bus Interfaces USB
Supply Voltage 5V
Series OEM-MICODE
Length 75mm
Width 50mm
Temporarily out of stock - back order for despatch 15/04/2020, delivery within 5 working days from desptach date
Price Each
PHP 2,621.64
(exc. VAT)
PHP 2,936.24
(inc. VAT)
units
Per Unit
1 +
PHP2,621.64
Related Products
Siretta's range of SNYPER signal and network testers ...
Description:
Siretta's range of SNYPER signal and network testers are available for both 2G (8968187) and 3G (8968181) networks. They allow you to establish the best GPRS connection for your location by providing data on antenna placement, existing performance and network ...
The MicroRWD chip module is a complete RF ...
Description:
The MicroRWD chip module is a complete RF transponder. Requires connection to the coil antenna. Tag Reader / Writer ModulePerforms all Read / Write functionsSimple RS-232 interface24pin DIL PCB mounting moduleUp to 10cm range on 13.56MHzFast Baud rates up to ...
The MicroRWD QT module is a complete “contactless” ...
Description:
The MicroRWD QT module is a complete “contactless” reader for 125kHz Hitag 1/S, HiTag 2, EM400X/4102 and MCRF200I/123 passive RFID transponder types. Operating Frequency: 125kHzRead/Write Range: up to 200mmHost communication: serial UART @ 9600bps with CTS flow controlRequires 700μH antenna ...
The MicroRWD MF-IC module is a complete “contactless” ...
Description:
The MicroRWD MF-IC module is a complete “contactless” reader/writer for 13.56MHz Mifare and ICODE SLI cards and tags. Operating Frequency: 13.56MHzRead/Write Range: up to 100mmSupports Mifare™, ICODE™ and Ultralight™ protocolsHost communication: serial UART @ 9600bps with CTS flow controlAlternative Data ...