Eaton Switched Neutral, For Use With 25 A Switch Disconnector, 32 A Switch Disconnector

  • RS Stock No. 333-524
  • Mfr. Part No. N-P1/SOND
  • Manufacturer Eaton
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): GB
Product Details

Switch Disconnectors with Auxiliary Contacts

For use on single-speed single direction motors
Sheet steel enclosures, ingress protection to IP65
Supplied with 1 x N/O and 1 x N/C auxiliary contact (20A 3 pole one N/O contact only)
Lockable in off position with up to three padlocks
Cover interlocked in the ON position

Note

Switch power/capacity refers to AC23A use at 380-440V. Accessories shown in this module only suitable for use with P series switch disconnectors.

Standards

BS EN60947 and VDE 0113

Warning

  • Because of the heating effect in compact enclosures, the 100A versions should be downrated to 85A when in continuous operation.
    Auxiliary contact 333-546 should not be used with switches above 100A operating current.
Specifications
Attribute Value
Accessory Type Switched Neutral
For Use With 25 A Switch Disconnector, 32 A Switch Disconnector
17 In Global stock for delivery within 4 - 8 working days
Price Each
PHP 539.24
(exc. VAT)
PHP 603.95
(inc. VAT)
units
Per Unit
1 +
PHP539.24
Related Products
Secured breaking: SIRCO M transfer switches include contact ...
Description:
Secured breaking: SIRCO M transfer switches include contact point technology and double break per pole as standard, enabling safe, optimal operation of LV electrical circuits. Modular device: Thanks to their modular format, SIRCO M transfer switches can be fixed to ...
All have a nominal voltage of 690V. The ...
Description:
All have a nominal voltage of 690V. The stated motor rating utilisation category AC23A/AC3 is for 3 phase 380/440V supply. Padlockable (x4) in "OFF" positionInterlocked in "ON" position to prevent panel door being opened while switch is "ON"
Auxiliary indicator contacts for fused switch-disconnectors GS1 series.Depending ...
Description:
Auxiliary indicator contacts for fused switch-disconnectors GS1 series.Depending on the models, they are used to indicate O and I positions, blowing of fuses or to prevent pre-cutoffs.Screw connections.For fitting on TS35 DIN rail.
TeSys GS switch-disconnector-fuses provide on-load breaking or making, ...
Description:
TeSys GS switch-disconnector-fuses provide on-load breaking or making, safe isolation and overcurrent protection of all low voltage electrical circuit. Can be used with NFC, DIN and BS fusesUpstream and downstream breaking of fuses for all ratingsConditional short-circuit withstand voltage of ...