Schneider Electric Pendant Station Enclosure Harmony XACA, Polypropylene, 12 Cutouts, IP65 - Yellow
- RS Stock No. 815-2954
- Mfr. Part No. XACA12H7
- Manufacturer Schneider Electric
Pendant Control Station XAC-A
Pendant control stations for auxiliary circuits. Designed for mechanical handling, these highly robust pendant control stations comply with the safety requirements of IEC standards
CE marking
UL/CSA certification
IP65
Double insulated polypropylene casing
Screw clamp connection
Schneider Electric - Push Buttons
Pendant control stations are used on hoists, overhead cranes and as remote control stations. They conform to EN60947-1, EN60947-5-1, NFC63-140 and VDE0660 part 2 standards. All actuator buttons incorporate 1 N/O and 1 N/C positive action contact rated at 240Vac, 3A I th ;250Vdc, 0.27A I th ; 10A I th allowing electrical cross-interlocking if desired.
Environmental protection to IP65Fitted cable clamps and stepped cable entry bootsMechanical interlocking between each pair of opposing pushbutton actuatorsAdapters supplied for self-supporting pendant cable, with lug for chain support
| Attribute | Value |
|---|---|
| Series | Harmony XACA |
| Cutout Diameter | 22mm |
| Number of Cutouts | 12 |
| Enclosure Colour | Yellow |
| Enclosure Material | Polypropylene |
| For Use With | XAC A Operating Heads |
| IP Rating | IP65 |
| Length | 680mm |
| Width | 92mm |
| Depth | 70mm |
| Maximum Operating Temperature | +70°C |
| Minimum Operating Temperature | -25°C |
