Xilinx XCF01SVOG20C, Configuration Memory 3 → 3.6 V 20-Pin TSSOP

  • RS Stock No. 626-0949
  • Mfr. Part No. XCF01SVOG20C
  • Manufacturer Xilinx
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
Product Details

XCFxx Configuration Flash Memory

The XCFxx series of Flash EPROMs provide an easy-to-use, cost-effective and reprogrammable method for storing large Xilinx FPGA configuration bitstreams.

In-System Programmable Flash memory devices for configuration of Xilinx FPGAs
IEEE Standard 1149.1/1532 Boundary-Scan (JTAG) support for Programming, Prototyping, and Testing
Cascadable for storing longer or multiple bitstreams
I/O pins compatible with voltage levels ranging from +1.5V to +3.3V

Specifications
Attribute Value
Mounting Type Surface Mount
Package Type TSSOP
Pin Count 20
Dimensions 6.5 x 4.39 x 1.04mm
Length 6.5mm
Width 4.39mm
Height 1.04mm
Maximum Operating Supply Voltage 3.6 V
Maximum Operating Temperature +85 °C
Minimum Operating Supply Voltage 3 V
Minimum Operating Temperature -40 °C
Discontinued product
Related Products
External switch mode plug-top power suppliesRegulated outputs100-240Vac 50/60Hz ...
Description:
External switch mode plug-top power suppliesRegulated outputs100-240Vac 50/60Hz inputOutput voltages selectable from 3V, 4.5V, 6V, 7.5V, 9V and 12Vdc1.8m output lead with polarity inverter & set of 6 interchangeable output connectorsPower on LED indicatorClass II - double insulated.
ST's MEMS accelerometers include analogue and digital sensors ...
Description:
ST's MEMS accelerometers include analogue and digital sensors featuring up to ±400g acceleration full scale and from 1.71 to 3.6 V supply voltage. Advanced power-saving features including low-power mode, auto wake-up function and FIFO buffer that can be used to ...
This series supports common control software, increasing design ...
Description:
This series supports common control software, increasing design and development efficiency. Tone quality can be adjusted by parametric equalizer using no external components. The built-in three-band equalizer sub woofer output allows for a space saving design. Reduce switching noise of ...
The SFP transceiver provides system designers the ability ...
Description:
The SFP transceiver provides system designers the ability to implement DC-50 MBaud data transmission over 2 km with (62.5 μm/125 μm) multimode fibers. The transceiver supports LC duplex connector and is lead free, RoHS compliant. Using the 2-wire serial interface ...