Cynergy3 Process Pump Controller, 250 V ac, IP21

  • RS Stock No. 348-7977
  • Mfr. Part No. FCTE45
  • Manufacturer Cynergy3
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): IT
Product Details

Pump Protection Switch

Fits to pump body or pipe work (pipe diameter 20 to 200mm)
A rapid rise past the set-point temperature of 45°C (if the inlet water level falls below the centre line of the inlet) of any centrifugal type pump, will cause this device to react.
High power switch cuts off the electrical supply to protect the pump from dry running, seal overheating and other damage
Switch rating: 16A/250V ac
Manual reset restarts the pump
Condition indicator light
Dimensions; H46mm, W46mm, L72mm

Specifications
Attribute Value
Supply Voltage 250 V ac
IP Rating IP21
Maximum Fluid Temperature +45°C
3 In Global stock for delivery within 4 - 8 working days
Price Each
PHP 2,305.75
(exc. VAT)
PHP 2,582.44
(inc. VAT)
units
Per Unit
1 - 5
PHP2,305.75
6 - 11
PHP2,229.64
12 +
PHP2,203.01
Related Products
The MultiTrode indicator probe provides continuous level indication ...
Description:
The MultiTrode indicator probe provides continuous level indication and pump control. The probe can be connected to a PLC or dedicated pump controller system. The 10 digital outputs provide a mechanism for simple pump control without any other control device. ...
Fully Automatic operation enabling both draining and filling ...
Description:
Fully Automatic operation enabling both draining and filling at the same time with a single device Protects submersible pumps against dry running and prevents overfilling Enables maximum utilization of incoming liquid supply Specially designed corrosion and shock resistant sensors to ...
Pump control, Alternating/parallel. Alternated access of two pumps ...
Description:
Pump control, Alternating/parallel. Alternated access of two pumps or other devicesEven distribution of dutyParallel duty at high demand Operation using 1 or 2 input signals (two modes of operation)Timing offset of the two loads to avoid water hammer effcectsSupply voltage ...
Features a differential pressure switch, dry running cut-out, ...
Description:
Features a differential pressure switch, dry running cut-out, control panel, pressure reservoir and non-return valveStart up pressure 0.5 to 3.5 bar minimum, adjustableDifferential pressure switch controls water pressure in pumped systems and ensures constant flowHelps to prevent boiler cycling and ...