Microchip MIC94070YC6-TR, 1High Side, Load Switch Power Control Switch 6-Pin, SC-70

  • RS Stock No. 177-2940
  • Mfr. Part No. MIC94070YC6-TR
  • Manufacturer Microchip
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): TH
Product Details

The MIC94070-73 are high-side load switches designed for operation between 1.7V to 5.5V. The devices contain a low on-resistance P-channel MOSFET that supports 1.2A of continuous current. The MIC94071 and MIC94073 feature an active load discharge circuit which insures capacitive loads retain no charge when the main switch is in an OFF state. MIC94070-71 feature rapid turn on while MIC94072-73 provide a slew rate controlled Soft-Start turn-on of 800μs (typical) to prevent in-rush current from glitching supply rails.An active pull-down on the enable input keeps MIC94070-73 in a default OFF state until the EN pin is pulled to a high level.

1.7V to 5.5V input voltage range
1.2A continuous operating current
3A pulse current
120mΩ RDSON (typical)
Built-in level shift for control logic, can be operated by 1.5V logic.
Low 2μA quiescent current
Soft-Start: MIC94072/73
Micro-power shutdown <1μA
Load discharge circuit: MIC94071, MIC94073

Specifications
Attribute Value
Power Switch Topology High Side
Power Switch Type Load Switch
Switch On Resistance 285mΩ
Number of Channels 1
Maximum Operating Supply Voltage 5.5 V
Maximum Operating Current 1.2 (Continuous)A
Mounting Type Surface Mount
Package Type SC-70
Pin Count 6
Maximum Operating Temperature +125 °C
Minimum Operating Temperature -40 °C
Dimensions 2.2 x 1.35 x 1mm
Series MIC94070
Temporarily out of stock - back order for despatch 10/12/2020, delivery within 6 working days from desptach date
Price Each (On a Reel of 3000)
Was PHP17.50
PHP 14.334
(exc. VAT)
PHP 16.054
(inc. VAT)
units
Per Unit
Per Reel*
3000 +
PHP14.334
PHP43,002.00
*price indicative
Related Products
The PAC1933 is a three-channel power monitor and ...
Description:
The PAC1933 is a three-channel power monitor and energy monitor that reports on bus voltage and sense voltage 16-bits of resolution. Power is reported as a simultaneous product of two 16-bit independent bus and sense voltages. All registers are accessible ...
The STMPS21xx power distribution switches are intended for ...
Description:
The STMPS21xx power distribution switches are intended for applications with expected heavy capacitive loads and short circuits. 90 mΩ high-side MOSFET switch500 mA continuous current for STMPS2141, STMPS21511000 mA continuous current for STMPS2161Thermal and short circuit protection with overcurrent logic ...
The MIC2040 and MIC2041 are high side MOSFET ...
Description:
The MIC2040 and MIC2041 are high side MOSFET switches optimized for general purpose power distribution applications that require circuit protection. The devices switch up to 5.5V and as low as 0.8V while offering both programmable current limiting and thermal shutdown ...
The MIC2544 and MIC2548 are integrated, high-side power ...
Description:
The MIC2544 and MIC2548 are integrated, high-side power switches optimized for low loss DC power switching and other power management applications, including Advanced Configuration and Power Interface (ACPI). The MIC2544/48 is a cost-effective, highly integrated solution that requires few external ...