Microchip PMBus-Enabled POL PWM Controller for MCP19111

  • RS Stock No. 111-5746
  • Mfr. Part No. ARD00609
  • Manufacturer Microchip
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

MCP19111 PMBus-Enabled POL Evaluation Board

This Microchip Evaluation Board demonstrates the MCP19111 digitally enhanced PWM Controller in a PMBus-enabled Point-of-Load Converter application. The board converts a 7V to 14V input range to an adjustable output of 0.8V to 3.6V. Nearly all operational and control system parameters of the MCP19111 are programmable and readable via PMBus communications.

The board provides all the needed circuitry to get a working demonstration up and running, with the MCP19111 being pre-programmed with the required firmware. The Microchip PMBus Monitoring Graphical User Interface (GUI) is used to monitor and configure the MCP19111. Alternatively the MCP19111 can be reprogrammed with user designed firmware through the on-board In-Circuit Serial Programming (ICSP) header.

The featured MCP19111 is a digitally enhanced PWM Controller. The device integrates an 8-bit PIC Microcontroller with a PWM Current Mode Controller to provide a flexible and customisable Buck Controller solution. The PWM Controller regulates the output of the DC-DC converter while the MCU dynamically customises the device. Operating parameters, start-up and shut-down profiles, protection levels and fault handling procedures can all be tailored to create a high efficiency buck converter.

Features

MCP19111 Digitally Enhanced PWM Controller
Pre-programmed with Firmware for Configuration and Communication
Input Range: 7 V to 14 V
Adjustable Output: 0.8 V to 3.6 V
Maximum Output Current: 20A
I²C/PMBus and Programming Communication Headers
USB to PMBus Bridge with mini USB Connector
PMBus Monitoring Graphical User Interface (GUI) for Configuration and Monitoring

Kit Contents

1 x MCP19111 PMBus-Enabled POL Evaluation Board
1 x USB Cable

Note

To reprogram the MCP19111 PMBus-Enabled POL Evaluation Board a Microchip PICkit In-Circuit Debugger/Programmer (Microchip part PG164130) is required. This is not included in the kit.

PWM (Pulse Width Modulation) Controllers, Microchip

Specifications
Attribute Value
Power Management Function PWM Controller
Kit Classification Evaluation Board
Featured Device MCP19111
Kit Name PMBus-Enabled POL
2 In Global stock for delivery within 4 - 8 working days
Price Each
PHP 7,814.12
(exc. VAT)
PHP 8,751.81
(inc. VAT)
units
Per Unit
1 +
PHP7,814.12
Related Products
The universal 8611 controller is especially designed for ...
Description:
The universal 8611 controller is especially designed for compact control system applications. It is compatible with a wide range of proportional control valves and connects with an electropneumatic servo-system for pneumatically actuated process control valves. Microprocessor controlControl of proportional and ...
The ISL8117, ISL8117A, are a synchronous Step down ...
Description:
The ISL8117, ISL8117A, are a synchronous Step down PWM (Pulse Width Modulation) Controllers that generate POL (Point-of-Load) voltage rails and bias voltage rails. The ISL8117A provides external configuration of the voltage loop compensation. Wide Power Supply from 4.5 V to ...
The ISL68137-61P-EV1Z board evaluates the ISL68137 Digital Dual ...
Description:
The ISL68137-61P-EV1Z board evaluates the ISL68137 Digital Dual Output, 7-Phase Configurable PWM Controller with Adaptive Voltage Scaling (AVSBus) Bus.The ISL68137 Digital Multiphase Controller is combined with the ISL99227 Smart Power Stage (SPS) to provide a balanced and highly efficient power. ...
The NCP1599 is a fixed 1 MHz, high-output-current, ...
Description:
The NCP1599 is a fixed 1 MHz, high-output-current, synchronous PWM converter that integrates a low-resistance, high-side P-channel MOSFET and a low-side N-channel MOSFET. The NCP1599 utilizes internally compensated current mode control to provide good transient response, ease of implementation, and ...