ON Semiconductor NIS5132MN2TXG, Power Factor Controller, 1 MHz, 25 V 10-Pin, DFN

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): MY
Product Details

Electronic Fuse, ON Semiconductor

Integrated Power Device
Power Device Thermally Protected
No External Current Shunt Required
9V to 18V Input Range
Internal Charge Pump
A Resistor sets the Current Limit level
A Capacitor programs the Slew Rate of the output at turn on (NIS5132 only)

Voltage & Current Management, ON Semiconductor

Specifications
Attribute Value
Maximum Switching Frequency 1 MHz
Maximum Sink Current -25µA
Maximum Supply Current 3.6 A
Mounting Type Surface Mount
Package Type DFN
Pin Count 10
Dimensions 3 x 3 x 0.95mm
Height 0.95mm
Length 3mm
Maximum Operating Supply Voltage 25 V
Maximum Operating Temperature +150 °C
Minimum Operating Supply Voltage -0.6 V
Minimum Operating Temperature -40 °C
Width 3mm
Temporarily out of stock - back order for despatch 20/10/2020, delivery within 6 working days from desptach date
Price Each (On a Reel of 3000)
Was PHP22.31
PHP 20.206
(exc. VAT)
PHP 22.631
(inc. VAT)
units
Per Unit
Per Reel*
3000 +
PHP20.206
PHP60,618.00
*price indicative
Related Products
The NIS5232 is a cost effective, resettable fuse ...
Description:
The NIS5232 is a cost effective, resettable fuse which can greatly enhance the reliability of a hard drive or other circuit from both catastrophic and shutdown failures. It is designed to buffer the load device from excessive input voltage which ...
Intelligent controlMenu driven handling (plain language; ... control ...
Description:
Intelligent controlMenu driven handling (plain language; ... control capabilityAutomatic initialisationTest-run possibleLarge voltage measuring rangeRecall function of recorded valuesFour-quadrant operation (e.g. stand by generator)Control series editorDetailed expert modesAlarm output6 Relay outputsVoltage: 230Vac.
The HiperPFS-4 devices incorporate a continuous conduction mode ...
Description:
The HiperPFS-4 devices incorporate a continuous conduction mode (CCM) boost PFC controller, gate driver and 600 V power MOSFET in a single, low-profile (GROUND pin connected) power package. HiperPFS-4 devices eliminate need for external current sense resistors and their associated ...
Pulse-width modulator (PWM) controllers can support isolated and ...
Description:
Pulse-width modulator (PWM) controllers can support isolated and non-isolated AC-DC and DC-DC switch mode power supplies. They are based on the most popular topologies in both single-ended, such as fly-back, forward or quasi-resonant controllers, and double-ended configurations, such as asymmetrical ...