MG Chemicals 832TC-450ML Black Thermal Conductivity Epoxy Potting Compound

  • RS Stock No. 918-4992
  • Mfr. Part No. 832TC-450ML
  • Manufacturer MG Chemicals
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): CA
Product Details

MG Chemicals Epoxy Potting Compounds

The MG Chemicals two-part epoxy potting compound has been designed to protect your electronic components. The liquid electric grade 832 series epoxy protects your components against static discharges, fungus, thermal shocks, mechanical impact and vibrations.

Feature and Benefits

Impact resistant
Non-conductive
Low toxicity
Improves reliability and operational range
Non-porous, water and chemical resistant
Hard to remove
Available in different colours

Typical Applications

Aviation Industry
Communication Industry
Marine Industry
Car industry

Note

Refer to the datasheet for more details on how to apply and applications

Caution

Due to exothermic reaction, heat cure temperatures should be at least 25% below the maximum temperature tolerated by the most fragile PCB component. For larger potting blocks, reduce heat cure temperature by greater margins

Potting Compounds

The Potting Compounds are pourable two-part compounds for potting and encapsulating electronic circuits and components. They protect against moisture and corrosion and improve insulation resistance and mechanical strength. They may be cured at room temperature, or oven cured. Use silicone oil aerosol as a mould release agent. Full instructions supplied with each pack.
Suitable disposable polyethylene gloves stock no. 613-3156 are available.

Specifications
Attribute Value
Product Material Epoxy
Package Type Can
Package Size 450 ml
Special Properties Thermal Conductivity
Cure Time 2 → 96 h
Colour Black
Maximum Operating Temperature +140°C
Minimum Operating Temperature -30°C
Operating Temperature Range -30 → +140 °C
Setting Time 120min
Specific Gravity 1.6156
Physical Form Liquid
Chemical Composition Acetone, Ethyl Lactate, Hydrocloric Acid, Isohexanes, Isopropyl Alcohol, Mineral Spirits, Xylene
Viscosity Measurement 38000 → 40000cP/s
Temporarily out of stock - back order for despatch when stock is available
Price Each
PHP 3,575.77
(exc. VAT)
PHP 4,004.86
(inc. VAT)
units
Per Unit
1 - 14
PHP3,575.77
15 - 39
PHP3,475.32
40 +
PHP3,382.05
Related Products
Pre-filled gel accessories inclusive of connectors to seal, ...
Description:
Pre-filled gel accessories inclusive of connectors to seal, protect and make safe electrical connections. Upgrade of range with latest generation of splicing connectors. READY TO USE , QUICK, RE-ENTERABLEIdeal for outdoor & underground installations, fully submersibleNo tools requiredCan energise immediatelyFor ...
Micro-connectors insulated and sealed with gel having antioxidant ...
Description:
Micro-connectors insulated and sealed with gel having antioxidant and anti-corrosion properties. READY TO USE , QUICK, RE-ENTERABLEIdeal for outdoor & underground installations, fully submersibleSelf-locking connection blockImmediately energizableFor STRAIGHT & BRANCH connectionsFor rigid or flexible insulated ...
Gel pre-filled micro joint, space-saver complete with connectors ...
Description:
Gel pre-filled micro joint, space-saver complete with connectors and with minimal aesthetic impact. Equipped with cable glands to avoid accidental cable tractionComplete with screw connectorsPre-filled with non-toxic, non-classified gelVery compact and ready to useAlways re-enterableHalogen free & UV resistant.
Barney Y and Fred Y micro joints for ...
Description:
Barney Y and Fred Y micro joints for branch connections complete with terminal block. Extremely compact and space-saving, pre-filled with soft, highly conformable gel. With minimal aesthetic impact and visually pleasing. Equipped with integrated cable glands for ingress protection and ...