Omron Plug In Power Relay, 230V ac Coil, 10A Switching Current, DPDT

All units have a Mechanical indicator and lockable test button (with nameplate)
Units with a "-5" in the Manufacturer Part Number have non-standard connections, refer to datasheet
Contact rating: 10A at 30Vdc/250Vac
Contact material: AgSnIn
Operating temperature: -40 → +60 °C

When Relays are mounted on the PF083A-E or PF113A-E, the maximum carrying current is 9 A

UL, TUV (IEC), CSA

The Omron MKS2PI AC230 non-latching relay is complete with the same wiring as previous Super MK series lays along with a built-in mechanical indicator and lockable test button. This standard model of relay has DPDT contacts and AC/DC coil ratings. As this model is a standard non-latching relay with standard internal connections there is no LED indicator included.

• MK-S Super Series.
• Built-in mechanical indicator.
• Lockable test button (do not use the test button unless to test the relay)
• AC/DC coil.
• DPDT Contacts.
• Rated voltage 230 V ac.
• Rated current 10 mA at 50 HZ, 11.5 mA at 60 Hz.
• Coil resistance 4250 Ω.
• Must operate voltage 80% max of rated voltage.
• Must release voltage 30% min of rated voltage at 60 Hz, 25% min of rated voltage at 50 Hz.
• Max voltage 110% of rated voltage.
• Power consumption 2.3 VA at 60 Hz, 2.7 VA at 50 Hz.

• Single mechanism.
• Material AgSnIN.
• NO (normally open) rated load 10 A. 250 V ac, 10 A, 30 V dc.
• NC (normally closed) rated load 5 A, 250 V ac, 5 A, 30 V dc.
• Rated carry current and max switching current 10 A.
• Switching voltage max 250 V ac, 250 V dc.

• Dielectric strength 2500 V ac 50/60 Hz (1 min between coil and contacts).
• Dielectric strength 1000 V ac 50/60 Hz (1 min between contacts and terminal of the same polarity).
• Dielectric strength 2500 V ac 50/60 Hz (1 min between current carrying parts, non-current parts and opposite polarity).
• Pollution degree 3.
• Vibration resistance destruction 10 to 55 to 10 Hz, 0.75 mm single amplitude, 1.5 mm double amplitude.
• Vibration resistance malfunction 10 to 55 to 10 Hz, 0.5 mm single amplitude, 1 mm double amplitude.
• Shock resistance destruction 1000 m/s².
• Shock resistance malfunction 100 m/s².
• Ambient operating temperature -40°C to 60°C, no icing or condensation.
• Relay approx. weight 90 g.

• Ensure the marking is at the bottom when mounting the MK-S.
• Ensure you do not accidentally as this will turn ON the contacts.
• Ensure that circuits, load and any other connected items operate safely before using the test button.
• Use an insulated tool when operating the test button.