6 Pole Panel Mount Non Fused Isolator Switch, NO, 32 A, IP65

  • RS Stock No. 764-978
  • Mfr. Part No. T3-4-15682/S/SVB-SOND
  • Manufacturer Eaton
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): GB
Product Details

Switch Disconnectors with Auxiliary Contacts

For use on single-speed single direction motors
Sheet steel enclosures, ingress protection to IP65
Supplied with 1 x N/O and 1 x N/C auxiliary contact (20A 3 pole one N/O contact only)
Lockable in off position with up to three padlocks
Cover interlocked in the ON position

Note

Switch power/capacity refers to AC23A use at 380-440V. Accessories shown in this module only suitable for use with P series switch disconnectors.

Standards

BS EN60947 and VDE 0113

Warning

  • Because of the heating effect in compact enclosures, the 100A versions should be downrated to 85A when in continuous operation.
    Auxiliary contact 333-546 should not be used with switches above 100A operating current.
Specifications
Attribute Value
Number of Poles 6
Maximum Current 32 A
Mounting Type Panel Mount
Normal State Configuration NO
IP Rating IP65
Accepts Padlocks Yes
Voltage Rating 440 V ac
Auxiliary Contacts Available Yes
Throw Configuration Single
Handle Colour Red
Maximum Operating Temperature +40°C
Minimum Operating Temperature -25°C
Terminal Type Screw
1 In Global stock for delivery within 4 - 8 working days
Price Each
PHP 13,396.51
(exc. VAT)
PHP 15,004.09
(inc. VAT)
units
Per Unit
1 - 5
PHP13,396.51
6 +
PHP12,734.25
Related Products
All switches rated at AC22Auxiliary neutral 25A-36A rear ...
Description:
All switches rated at AC22Auxiliary neutral 25A-36A rear mount for door interlocks and boxed isolators, front mount for panel mount isolatorsAuxiliary change over contacts 20A-63A rear mount for door interlock and boxed isolatorsMain Pole contact 25A-63A front mount for panel ...
A high quality, durable back of panel mount ...
Description:
A high quality, durable back of panel mount isolator complete with handle and shaft. The switch is back of panel mount, either 35mm din rail or two screw fixing. The handle is interlocked ensuring removal only in the off position, ...
RS Pro high quality range of boxed isolator ...
Description:
RS Pro high quality range of boxed isolator switch disconnectors for use with low voltage switchgear such as power distribution, load isolation and motor start/stop. The RS Pro range comes in 3, 4 and 6 pole versions and has a ...
RS Pro high quality range of boxed isolator ...
Description:
RS Pro high quality range of boxed isolator switch disconnectors for use with low voltage switchgear such as power distribution, load isolation and motor start/stop. The RS Pro range comes in 3, 4 and 6 pole versions and has a ...