Phoenix Contact QTC 1.5/ 1P Series Grey DIN Rail Terminal Block, 1.5mm², Single-Level, Plug In Termination

Terminal block with pull-out connection zone from the CLIPLINE COMBI range.
Self-stripping connection.
Permissible cable cross-section: 1.5 mm2.
Compatible with SP, UP, QP and DP ready-made connectors.
Terminal block width: 5.2 mm.
TS35 DIN rail mounting.

CLIPLINE COMBI terminal blocks

A highly flexible system of terminal blocks featuring a disconnectable plug-in zone and 4 connection methods: screw (UT), spring-cage (ST), push-in (DT) and self-stripping (QT). The entire range is standardised. These four connections methods can be freely combined to connect terminal blocks and pluggable connectors, whatever their connector type. Both the bases and connectors are protected from coming into contact with hands. Self-stripping connections (QT-COMBI): Wiring time is reduced by up to 60%, as cables need not be stripped.A screwdriver is used to lock the self-stripping mechanism. Spring terminals (ST - COMBI): The connection point is opened using a screwdriver to lever the spring. This technology provides constant contact force for vibration-proof use. Screw connection (UT - COMBI): Universal terminal enabling a multi-conductor connection.