Fluke 1662 Multifunction Tester, 100 V, 250 V, 500 V, 1000 V
Temporarily out of stock - back order for despatch 27/12/2021, delivery within 5 working days from desptach date
Added
- RS Stock No.:
- 117-6665
- Mfr. Part No.:
- FLK-1662 SCH
- Manufacturer:
- Fluke
RoHS Status: Not Applicable
- COO (Country of Origin):
- GB
| units | Per Unit |
| 1 + | PHP65,980.46 |
Fluke 1662 Multifunction Installation Testers
<B>Features</B>
Note
Standards
Supplied with
| Attribute | Value |
| Loop Impedance Test Type | Phase to Earth, Phase to Neutral |
| Automatic RCD Test | Yes |
| RCD Ramp Test | Yes |
| Insulation Test Voltage | 100 V, 250 V, 500 V, 1000 V |
| Maximum Voltage Measurement | 500V ac/dc |
| Test Type | Continuity, Frequency, Insulation Resistance, Loop and Line Resistance, Measure Motor Windings, Phase Sequence Test, Prospective Earth Fault Current, Prospective Short Circuit Current, RCD Test, Resistance, Voltage, Wiring Polarity |
| Continuity Test Current | 10mA |
| RCD Test Type | A/F, AC Type, G, S |
| Remote Switch Mode | Yes |
| Minimum Continuity Resistance | 20Ω |
| Display Type | LCD |
| IP Rating | IP40 |
| Power Source | Battery |
| Height | 125mm |
| Width | 250mm |
| Length | 100mm |
| Safety Category | CAT III 500 V, CAT IV 300 V |
| Dimensions | 100 x 250 x 125mm |
| Battery Type | AA |
| Safety Category Voltage | 300 V, 500 V |
| Maximum Continuity Resistance | 2000Ω |
| Safety Category Level | CAT III, CAT IV |
| Model Number p | 1662 |
| Weight | 1.3 (with Battery)kg |