ON Semiconductor NCV5700DR2G High and Low Side IGBT Gate Driver Module, 6.8 A, 7.8 A 16-Pin, SOIC

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

The NCV5700 is a high-current, high-performance stand-alone IGBT driver for high power applications that include solar inverters, motor control and uninterruptable power supplies. The device offers a cost-effective solution by eliminating many external components. Device protection features include Active Miller Clamp, accurate UVLO, EN input, DESAT protection and Active Low FAULT output. The driver also features an accurate 5.0 V output and separate high and low (VOH and VOL) driver outputs for system design convenience. The driver is designed to accommodate a wide voltage range of bias supplies including unipolar and bipolar voltages. It is available in a 16-pin SOIC package.

High Current Output (+4.0/-6.0 A) at IGBT Miller Plateau voltages
Reduced switching losses and short switching times
Low VOH and VOL
Full enhancement of IGBT
Active Miller Clamp
Prevents Spurious Gate Turn-on
DESAT Protection with Programmable Delay
Enhanced programmable protection
DC-AC Inverter
Battery Charger
Motor Driver
Automotive PTC Heater
Motor Control
Electric Vehicles

Attribute Value
Number of Drivers 1
Minimum Operating Supply Voltage 0 V
Maximum Operating Supply Voltage 30 V
Topology High and Low Side
Mounting Type Surface Mount
Peak Output Current 6.8 A, 7.8 A
Number of Outputs 1
Polarity Non-Inverting
Package Type SO
Pin Count 16
Bridge Type Half Bridge
High and Low Sides Dependency Yes
Dimensions 10 x 4 x 1.5mm
Minimum Operating Temperature -40 °C
Rise Time 9.2ns
Width 4mm
Height 1.5mm
Automotive Standard AEC-Q100
Time Delay 75ns
Maximum Operating Temperature +125 °C
Fall Time 7.9ns
Length 10mm
2410 In Global stock for delivery within 4 - 8 working days
Price Each (In a Pack of 10)
PHP 65.788
(exc. VAT)
PHP 73.683
(inc. VAT)
Per Unit
Per Pack*
10 - 240
250 - 490
500 - 1240
1250 +
*price indicative
Packaging Options:
Related Products
3-phase 600V MOSFET and IGBT gate driver ICs ...
3-phase 600V MOSFET and IGBT gate driver ICs from Infineon based on proven existing SOI-technology. The absence of parasitic thyristor structures in these rugged devices prevents latch-up under all normal operating conditions. The drivers include under-voltage over-current detection and can ...
The Semikron Board 1 SKYPER® 32 R is ...
The Semikron Board 1 SKYPER® 32 R is an adaptor board for the IGBT driver module allowing customisation to suit the specific IGBT output module used. The switching characteristics of the IGBTs can be influenced through user selection of the ...
A range of dedicated Gate Driver ICs from ...
A range of dedicated Gate Driver ICs from Texas Instruments suitable for both MOSFET and IGBT applications. The devices are capable of providing suitable high current outputs compatible with the drive requirements of MOSFET and IGBT power devices and are ...
The STMicroelectronics gate driver is a high voltage ...
The STMicroelectronics gate driver is a high voltage device manufactured with the BCD6 "OFF-LINE" technology. It is a single-chip half-bridge gate driver for N-channel power MOSFETs or IGBTs. The MOSFET can sink 2.5A and source 2A, making it particularly suited ...