Microchip ATSAMA5D27-SOM1, ARM Cortex A5 Microprocessor SAMA5D2 RISC 500MHz 176-Pin Module

  • RS Stock No. 168-2814
  • Mfr. Part No. ATSAMA5D27-SOM1
  • Manufacturer Microchip
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

The ATSAMA5D27-SOM1, which contains the ARM® Cortex®-A5 ATSAMA5D27C-D1G-CU System in Package (SiP), greatly simplifies design by integrating the power management, non-volatile boot memory, Ethernet PHY and high-speed lower power DDR2 memory onto a small, single-sided Printed Circuit Board (PCB). The SAMA5D27-SOM1 is built on a common set of proven Microchip components and limits the design rules of the main application board, reducing overall PCB complexity and cost. You can solder the SOM on a mother board and take it to production, or it can be used as a reference design along with the free schematics, design and Gerber files and complete bill of materials which are available online. You can also transition from the SOM to the SiP or the SAMA5D2 MPU itself, depending on your design needs.

- SAMA5D27 ARM Cortex-A5 processor
- 1GB (128MB) DDR2 DRAM
- On-board power management unit
- Single 3.3V supply
- Pre-programmed EUI-48 MAC address
- Industrial temperature range (-40 to 85°C)
- 40 x 38 mm Module, 0.8 mm pitch

Attribute Value
Family Name SAMA5D2
Device Core ARM Cortex A5
Instruction Set Architecture RISC
Maximum Frequency 500MHz
Mounting Type Surface Mount
Package Type Module
Pin Count 176
Typical Operating Supply Voltage 3.3 V
Dimensions 40.1 x 38.1 x 1.55mm
Height 1.55mm
Length 40.1mm
Width 38.1mm
Minimum Operating Temperature -40 °C
Maximum Operating Temperature +85 °C
4 In Global stock for delivery within 4 - 8 working days
Price Each
PHP 2,029.86
(exc. VAT)
PHP 2,273.44
(inc. VAT)
Per Unit
1 - 9
10 +
Packaging Options:
Related Products
The 4D Systems MOTG (Modules on the Go) ...
The 4D Systems MOTG (Modules on the Go) product family provides an innovative plug and play solution for adding key functionalities to 4D Systems gen4 LCD Display Modules.Utilising a modular concept, the MOTG range provides a simple method for swift ...
These modules are MCU to USB host controller ...
These modules are MCU to USB host controller development modules for the Vinculum VNC1L device. They are supplied on a PCB designed to fit into 24-pin or 40-pin DIP sockets and provide access to the UART, parallel FIFO and SPI ...
The MCP2200 Breakout Module allows for the evaluation ...
The MCP2200 Breakout Module allows for the evaluation and development of the MCP2200 serial converter. Dual In-Line Package (DIP) Form Factor BoardUART Tx and Rx signalsUART RTS and CTS signals8 General Purpose (GP) linesUser selectable power supply of 3.3 V ...
Barth professional range of STG-810 CAN Mini-PLC with ...
Barth professional range of STG-810 CAN Mini-PLC with a powerful 32-bit ARM Cortex core. The STG-810 Mini-PLC features a rugged CAN/CANopen interface with intuitive graphical programming capability. These Mini-PLC’s provide hardware-oriented microcontroller programming at lowest current consumption in a small ...