ON Semiconductor NCL30105GEVB, 350 mA Buck LED Driver Evaluation Board LED Driver Evaluation Board for NCL30105DR2G

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

The NCL30105 is a peak current controlled fixed off time buck controller designed for LED driver applications. It is optimized to operate in deep continuous conduction mode eliminating the need for output electrolytic capacitors. Featuring an adjustable off time generator, the controller can drive a MOSFET up to a switching frequency of 500 kHz. A dedicated dimming pin enables the use of a pulsewidth modulated logic signal to dim the LED directly. The soft-start pin creates a startup sequence that slowly ramps up the peak current and enables the adjustment of the peak current set point for analogue dimming control. The device features robust protection features to detect switch overcurrent faults and to detect maximum on time events.

Specifications
Attribute Value
LED Technology LED Driver
Kit Classification Evaluation Board
For Use With Buck LED Driver
Featured Device NCL30105DR2G
Kit Name 350 mA Buck LED Driver Evaluation Board
2 In Global stock for delivery within 4 - 8 working days
Price Each
PHP 7,789.00
(exc. VAT)
PHP 8,723.68
(inc. VAT)
units
Per Unit
1 +
PHP7,789.00
Related Products
The EVALLED-ICL8002G-B3 is demo board for dimmable 20 ...
Description:
The EVALLED-ICL8002G-B3 is demo board for dimmable 20 W LED PAR38 in isolated flyback topology. It is designed for high efficiency, high-power factor, low THD and isolation. The primary side control with the integrated PFC and phase-cut dimming control makes ...
The Infineon EVALLEDICL8201F1 is designed using the LED ...
Description:
The Infineon EVALLEDICL8201F1 is designed using the LED driver ICL8201 and the N-Channel MOSFET transistor IPU50R3K0CE. The ICL8201 cascode topology enables lower system cost and higher system efficiency. Typical applications are GU10 LED Lamp. Supports wide range AC or DC ...
This is a single stage power factor corrected ...
Description:
This is a single stage power factor corrected isolated flyback LED driver intended for lighting applications such as down lights, PAR lamps and residential/commercial indoor and outdoor LED fixtures. The NCL30000 is based on a fixed on-time, critical conduction mode ...
This is a single stage power factor corrected ...
Description:
This is a single stage power factor corrected TRIAC dimmable isolated flyback LED driver intended for lighting applications such as down lights, PAR lamps and residential/commercial LED fixtures. The NCL30000 is based on a fixed on-time, critical conduction mode (CrM) ...