Infineon ICL8002GXUMA1 LED Driver IC, -0.3 → 27 V 10mA 8-Pin

  • RS Stock No. 166-0885
  • Mfr. Part No. ICL8002GXUMA1
  • Manufacturer Infineon
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): TW
Product Details

ICL8002G Off-line LED Driver IC

The Infineon ICL8002G is an offline LED driver IC part of the ICL series supporting dimming levels down to 1%. It is a highly integrated LED driver with primary side control that reduces the number of required components and simplifies design. A low-cost bleeder circuit supports great dimmer compatibility for mainstream single stage non-isolated buck or isolated flyback topologies. Typical applications are LED replacements lamps (e.g. A-bulb, linear tubes) or LED luminaires (e.g. downlights, spotlights).

Features

Supports single stage PFC/quasi resonant flyback and PFC/floating buck topology
Integrated HV start-up cell for short time to light
Comprehensive protection features
Optimised for phase-cut dimming compatibility
High efficiency up to 90%
Good line and load regulation capabilities
Power factor up to 98% with low THD (<20%)
Smooth dimming curve with high dimmer compatibility
Primary side control with high accuracy
Integrated power cell for short time to light
Built-in digital soft-start
Isolation Voltage: 1250 Vac to 3750 Vac
Operating Temp.: -40°C to +125°C

LED Drivers, Infineon

Specifications
Attribute Value
Output Current 10mA
Input Voltage -0.3 → 27 V
AC or DC Input Voltage Dc
Dimming Operation PWM
Application LED Luminaries, LED Replacements Lamps
Number of Pins 8
Maximum Output Voltage 27V
Minimum Output Voltage -0.3V
Current Rating 5mA
Series ICL
Temporarily out of stock - back order for despatch 08/06/2020, delivery within 5 working days from desptach date
Price Each (On a Reel of 2500)
PHP 66.675
(exc. VAT)
PHP 74.676
(inc. VAT)
units
Per Unit
Per Reel*
2500 +
PHP66.675
PHP166,687.50
*price indicative
Related Products
LYTSwitch-3 single-stage LED driver ICs with combined power ...
Description:
LYTSwitch-3 single-stage LED driver ICs with combined power factor correction and constant current outputs from Power Integrations. These devices incorporates a high-voltage power MOSFET and discontinuous mode, variable frequency, variable on-time controller integrated into a single chip. They can provide ...
BU2090FS incorporates a built-in shift register and a ...
Description:
BU2090FS incorporates a built-in shift register and a latch circuit to control 12 LED by serial interface, linked to a microcontrollers. LED can be driven directly. (Output current 25mA)12 bit parallel outputOperational on low voltage (2.7V to 5.5V)Applications:MFP(Multi Function Printer)Air-conditionerSTB ...
The multi-level brightness control LED works as a ...
Description:
The multi-level brightness control LED works as a constant current driver in 64 steps, so that the driving current can be adjusted finely. BD1754HFN is best suited to turn on LEDs that require high-accuracy LED brightness control. Current regulation for ...
The ROHM BD9486F series is a high-efficiency LED ...
Description:
The ROHM BD9486F series is a high-efficiency LED driver for white LEDs and designed for a large LCD panel. It has a boost DC-DC converter that employs an array of LEDs as the light source. This driver has some protective ...