- RS Stock No.:
- 737-4695
- Mfr. Part No.:
- UM232H
- Manufacturer:
- FTDI Chip
15 In Global stock for delivery. NCR Plus within 10 working day(s), rest of PH within 14 working days
44 In Global stock for delivery. NCR Plus within 10 working day(s), rest of PH within 14 working days
Price Each
Was PHP1,468.77
You pay
PHP1,383.20
(exc. VAT)
PHP1,549.18
(inc. VAT)
units | Per Unit |
1 + | PHP1,383.20 |
- RS Stock No.:
- 737-4695
- Mfr. Part No.:
- UM232H
- Manufacturer:
- FTDI Chip
Technical data sheets
Legislation and Compliance
Product Details
UM232H USB to Serial UART Development Module, FTDI Chip
The UM232H is a USB-to-serial/FIFO development module in the FTDI product range which utilises the FT232H USB Hi-Speed (480Mb/s) single-port bridge chip to handle the USB signaling and protocols. The UM232H is ideal for development purposes to quickly prove functionality of adding USB to a target design. The UM232H is a module designed to plug into a standard 0.6in wide 28-pin DIP socket. The USB connection to a host system is via a mini-B USB connector.
USB 2.0 Hi-Speed (480Mbits/s) and Full Speed (12Mbits/s) compatible
Entire USB protocol handled on the chip – No USB-specific firmware programming required
Small USB Type B connector common on many commercial devices
USB bus or self-powered options
Asynchronous UART transfer data rate up to 12Mbaud
UART interface support for 7 or 8 data bits, 1 or 2 stop bits and odd / even / mark / space / no parity
Fully assisted hardware or X-On / X-Off software handshaking
Auto-transmit buffer control for RS-485 applications
Supports a half duplex FT1248 interface with a bi-directional data bus (1, 2, 4 or 8 bits wide)
Synchronous Serial (MPSSE) data rates of up to 30Mbps on JTAG, SPI and I²C
Support for USB suspend and resume
UHCI / OHCI / EHCI host controller compatible
FTDIs royalty-free VCP and D2XX drivers eliminate the requirement for USB driver development in most cases
+2.97 to +5.25V single-supply operation
Entire USB protocol handled on the chip – No USB-specific firmware programming required
Small USB Type B connector common on many commercial devices
USB bus or self-powered options
Asynchronous UART transfer data rate up to 12Mbaud
UART interface support for 7 or 8 data bits, 1 or 2 stop bits and odd / even / mark / space / no parity
Fully assisted hardware or X-On / X-Off software handshaking
Auto-transmit buffer control for RS-485 applications
Supports a half duplex FT1248 interface with a bi-directional data bus (1, 2, 4 or 8 bits wide)
Synchronous Serial (MPSSE) data rates of up to 30Mbps on JTAG, SPI and I²C
Support for USB suspend and resume
UHCI / OHCI / EHCI host controller compatible
FTDIs royalty-free VCP and D2XX drivers eliminate the requirement for USB driver development in most cases
+2.97 to +5.25V single-supply operation
The FTDI UM232H is a single channel USB-to-serial/FIFO development module. It is based on the FT232H single channel USB UART/FICO device. The UM232H development module is the perfect tool for adding USB functionality to your project.
How does it connect?
The UM232H plugs straight into a 0.6inch wide, DIP-28 socket. It connects to the host via the on-board mini USB socket.
What is it used for?
The UM232H is ideal for integrating USB into an existing design. Example applications include; smart card readers, wireless modems, bar code readers and medical applications.
How does it connect?
The UM232H plugs straight into a 0.6inch wide, DIP-28 socket. It connects to the host via the on-board mini USB socket.
What is it used for?
The UM232H is ideal for integrating USB into an existing design. Example applications include; smart card readers, wireless modems, bar code readers and medical applications.
Specifications
Attribute | Value |
---|---|
Kit Classification | Development Board |
Featured Device | FT232H |