MikroElektronika, ProxFusion Click Capacitive Touch Sensor mikroBus Click Board for IQS624, MIKROE-2920

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): CS
Product Details

MikroElektronika ProxFusion Click Board

The MikroElektronika ProxFusion click board is a multifunctional capacitive and hall-effect sensor device. It has IQS624 which is a combined multi-sensor IC from Azoteq which includes hall-effect rotation sensing, along with dual channel capacitive proximity or touch sensing, or single-channel inductive sensing. This click can detect touch by using two On-board sensor pads and it can sense a rotation angle of a magnetic field, parallel with the surface of the click board. The intelligent On-board IC calculates all the parameters and streams the current angle value to the I2C bus directly without the need for extra calculations.

Features and Benefits

• 42.9x25.4mm compact size
• GPIO and I2C Interfaces
• Low power consumption
• Maximum continuous current is 10mA
• Operating supply voltage is 3.3V
• Operating temperature ranges between -20°C and 85°C
• ProxFusion™ sensor series featuring the proven ProxSense® engine

Applications

• Advanced HMI interfaces
• Digital angle gauge
• Dimmed TFT backlight
• Wearable devices

Specifications
Attribute Value
Interface Function Capacitive Touch Sensor
Kit Classification MikroBus Click Board
Featured Device IQS624
Kit Name ProxFusion Click
18 In Global stock for delivery within 4 - 8 working days
Price Each
PHP 472.50
(exc. VAT)
PHP 529.20
(inc. VAT)
units
Per Unit
1 +
PHP472.50
Related Products
The LC234X module provides a low cost USB ...
Description:
The LC234X module provides a low cost USB to UART bridge using the FT234XD IC to transfer data at up to 3M Baud. Ideal for programming Arduino Pro, ESP modules etc., the pinouts follow the industry standard FTDI TTL cable ...
RS485 2 click carries the MAX3471 half-duplex transceiver ...
Description:
RS485 2 click carries the MAX3471 half-duplex transceiver intended for lithium battery-powered RS-485/RS-422 applications. The click is designed to run on either 3.3V or 5V power supply. It communicates with the target microcontroller over UART interface with additional functionality provided ...
The Click accessory modules plug into the MikroBUS ...
Description:
The Click accessory modules plug into the MikroBUS sockets in MikroElektronika microcontroller development boards. ETH Click features an ENC28J60, a 28-pin, 10Base-T stand-alone Ethernet Controller. ENC28J60, 10Base-T Ethernet ControllerMAC, PHY, 8KB buffer RAMSPI serial interfacePower supply: 3.3V.
The ADM2682E is a 5kVrms Signal and Power ...
Description:
The ADM2682E is a 5kVrms Signal and Power Isolated RS-485 Transceiver with ±15kV ESD Protection. Convenient connections for power and signal through screw terminal blocksConfigurable as half duplex or full duplex 5V or 3.3V operationEasily configurable through jumper connectionsTest points ...