ON Semiconductor TPS2398DMT7G, 1-Channel, Hot Swap Controller, Negative Voltage, -36 → -80 V 8-Pin, MSOP

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): TH
Product Details

Wide Input Supply: −36 V to −80 V
Transient Rating to −100 V
Improved Transient Response
Εnable Input (EN)
Programmable Current Limit
Programmable Current Slew Rate
Fault Timer to Eliminate Nuisance Trips
Open−Drain Power Good Output (/PG)
Wide input voltage range
Withstand input voltage spikes to −100 V
Input current spike suppression during input voltage transient
Output voltage could be switched on/off
Current limit could be set by external resistor
Current slew rate could be set by external capacitor
Load current spikes shorter than about 4us are ignored
/PG signal could be used to monitor hot-swap status
−48 V Distributed Power Systems
Redundant Negative Voltage Supplies
Central Office Switching Systems
End Products
Power source for telecom / computing (rack) systems

Attribute Value
Hot Swap Controller Type Negative Voltage
Typical Operating Supply Voltage -36 → -80 V
Number of Channels 1
External Sense Resistor Yes
External FET N-Channel
PGOOD Output Logic Active Low
Mounting Type Surface Mount
Package Type MSOP
Pin Count 8
Fault Management Latched Off
Dimensions 3.1 x 3.1 x 0.95mm
Height 0.95mm
Length 3.1mm
Minimum Operating Temperature -40 °C
Width 3.1mm
Maximum Operating Temperature +85 °C
3000 In Global stock for delivery within 4 - 8 working days
Price Each (On a Reel of 3000)
Was PHP71.80
PHP 57.834
(exc. VAT)
PHP 64.774
(inc. VAT)
Per Unit
Per Reel*
3000 +
*price indicative