Linear Technology LTC1643AL-1IGN#PBF, Dual, Hot Swap Controller Negative/Positive 16-Pin, SSOP

  • RS Stock No. 396-500
  • Mfr. Part No. LTC1643AL-1IGN#PBF
  • Manufacturer Analog Devices
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): MY
Product Details

Hot Swap Controllers, Linear Technology

Linear Technology offer a range of Hot Swap controllers providing circuit protection by limiting inrush current as well as fault isolation. They allow electronic circuit boards and cards to be inserted into live system backplanes. Hot Swap controller will sense, control and operate continuously as the boards are hot plugged in or pulled out. They can present board power monitoring via digital measurements of the current and voltage levels by integrated ADCs, accessible through I2C/SMBus interfaces. Linear Technology’s Hot Swap controllers utilise N-channel MOSFETs to control power flow, which allows a wide range of load currents and operating voltages.

These devices are often used in applications such as:
Server rack mount systems
Distributed power systems
Medical Systems, Telecom systems
Set Top Boxes
High side switch/circuit breakers
Switchers / Routers

Monitor, Control and Protection, Linear Technology

Specifications
Attribute Value
Hot Swap Controller Type Negative Voltage, Positive Voltage
Number of Channels 2
External Sense Resistor Yes
External FET N-Channel
PGOOD Output Logic Active Low
Mounting Type Surface Mount
Package Type SSOP
Pin Count 16
Fault Management Latched Off
Dimensions 4.98 x 3.99 x 1.5mm
Height 1.5mm
Length 4.98mm
Minimum Operating Temperature -40 °C
Width 3.99mm
Maximum Operating Temperature +85 °C
47 In Global stock for delivery within 4 - 8 working days
Price Each
PHP 619.35
(exc. VAT)
PHP 693.67
(inc. VAT)
units
Per Unit
1 - 9
PHP619.35
10 - 19
PHP602.16
20 - 49
PHP585.88
50 - 249
PHP570.45
250 +
PHP555.83
Packaging Options:
Related Products
The VIPerPlus series of high-voltage converters combine an ...
Description:
The VIPerPlus series of high-voltage converters combine an 800V avalanche-rugged MOSFET, that allows ultra-wide range mains voltage input, with a leading-edge PWM controller. VIPerPlus fixed frequency off-line converters enable SMPS designs meeting the most demanding energy saving regulations with enhanced ...
The PAC1932/3/4 are two, three and four-channel power ...
Description:
The PAC1932/3/4 are two, three and four-channel power and energy monitoring devices. A high-voltage multiplexer sequentially connects the inputs to a bus voltage monitor and current sense amplifier that feed high-resolution ADCs. Digital circuitry performs power calculations and energy accumulation. ...
Darlington transistor power drivers are high-voltage, high-current switch ...
Description:
Darlington transistor power drivers are high-voltage, high-current switch arrays containing multiple open-collector Darlington pairs and integral suppression diodes for inductive loads. The high current rating of each output is 500 mA or higher. The inputs are pinned opposite the outputs ...
Wide Input Supply: −36 V to −80 VTransient ...
Description:
Wide Input Supply: −36 V to −80 VTransient Rating to −100 VImproved Transient ResponseΕnable Input (EN)Programmable Current LimitProgrammable Current Slew RateFault Timer to Eliminate Nuisance TripsOpen−Drain Power Good Output (/PG)Wide input voltage rangeWithstand input voltage spikes to −100 VInput current ...