Pepperl + Fuchs Acceleration Sensor switching current 20 mA supply voltage 10 30 V dc

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): DE
Product Details

F99 Series

The F99 series acceleration sensors monitor strong vibrations or accelerations in a wind turbine due to wind loads on the equipment. The sensors provide a robust environmentally shielded enclosure and uses a non-contact measuring system for accurate detection to help avoid hazardous circumstances.

Non-contact measuring of accelerations in the range -2….+2 g
Two independent, orthogonal axes are detected separately
Sturdy housing suitable for outdoor use
Extended temperature range from –40 °C to +85 °C

Pepperl + Fuchs Acceleration Sensors

Acceleration sensors detect machine component wear and any critical operating states. This allows for corrective action to avoid potential damage to large-scale systems such as wind turbines.

Specifications
Attribute Value
Body Style Block
Supply Voltage 10 30 V dc
Terminal Type M12 Connector
Maximum DC Voltage 30V
Switching Current 20 mA
Switching Frequency 0 100 Hz
Length 65mm
Width 37mm
Depth 62.5mm
Dimensions 65 x 37 x 62.5 mm
Minimum Operating Temperature -40°C
Housing Material Polyamide
Maximum Operating Temperature +85°C
IP Rating IP68, IP69K
1 In Global stock for delivery within 4 - 8 working days
Price Each
PHP 29,368.82
(exc. VAT)
PHP 32,893.08
(inc. VAT)
units
Per Unit
1 +
PHP29,368.82
Related Products
Ceramic based, linear Hall-effect ratiometric devices which produce ...
Description:
Ceramic based, linear Hall-effect ratiometric devices which produce an output voltage proportional to the intensity of the magnetic field to which they are exposed. Three-pin in-line PCB terminals, 0.1in spacingLaser trimmed thin and thick film resistors-40 to 125°C operating range. ...
Hall effect vanes with integrated magnet for detecting ...
Description:
Hall effect vanes with integrated magnet for detecting metal targets.Ideal for detection or counting applications that cannot be carried out with an infrared sensor.For use in dirty and dusty industrial environments.Vertical or lateral mounting, pin or wire output depending on ...
Hall effect sensors with output proportional to supply ...
Description:
Hall effect sensors with output proportional to supply voltage and the strength of the magnet fieldSingle current sinking or current sourcing linear outputRail-to-rail operation provides more useable signal for higher accuracyResponds to either positive or negative gaussGood temperature stabilityTypical ...
2 output styles; 5V logic (pull-down) or PNP+ ...
Description:
2 output styles; 5V logic (pull-down) or PNP+ NPN (N/O)LED indication of alignment and diagnosisMatching magnet assembly must be used M12 threadCable length 300mm.