GLS-Ex Cable Switch with E-Stop, Straight, 80m, 2NO/2NC

  • RS Stock No. 826-4132
  • Mfr. Part No. 142030
  • Manufacturer IDEM
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): GB
Product Details

IDEM Guardian Line Explosion Proof Safety Rope Pull Switches

The Guardian Line GLS-Ex and GLS-SS-Ex from IDEM are safety rope pull switches with ATEX EExd IIC T6 certified explosion proof contact blocks that conform to European harmonized standard EN60079-0 and EN60079-1 and can be used in European Zone 1, 2, 21, 22 environments (gas and dust). They are designed to be mounted on machines and sections of conveyors which cannot be protected by guards and unlike emergency stop pushbuttons can be activated from any point along the length of rope pull to provide robust emergency stop protection.
In combination with a dual channel safety monitoring relay these safety rope switches can be used as emergency stop devices and monitored for up to Category 4 to EN 954-1 or PLe ISO 13849-1. The Guardian Line conforms to ISO 13850 and IEC 60947-5-5 and has a positive mechanical linkage between the switch contacts and the wire rope, as well as wire breakage monitoring. Once the rope is pulled, anywhere along its length, the safety contacts are positively opened and the auxiliary contacts are closed. The switches are mechanically latched and can only be returned to the operational condition by pressing the blue reset button, as required by ISO 13950.
Designed for use in oil, petro-chemical, pharmaceutical, food processing and packaging applications where the potential for explosive atmospheres are present.

ATEX EExd IIC T6 Certified explosion proof contact blocks
Contact blocks conform to European harmonized standard EN60079-0 and EN60079-1
Can be used in European Zone 1, 2, 21, 22 environments (Gas and Dust)
Switch mechanism will latch the instant the safety contacts open, ISO13850 standard
Upto 80m can be covered using one switch
Upto 100m can be covered using two switches
Positive break contacts to IEC60947-5-1

GLS-SS-Ex Rope Pulls

IP69K protection
Resistant to high pressure hosing at high temperature
Stainless steel 316 housing

GLS-Ex Rope Pulls

IP67 protection
Yellow painted diecast aluminium housing

Standards

IEC 60947-5-1, IEC 60947-5-5, EN 954-1, EN 62061, UL 508, ISO 13850, ISO 13849-1.

Approvals

IEC, IECEx, Ex, ATEX.

IDEM Rope Pull Switch

The IDEM GLS-Ex safety rope pull switch has 2NC/2NO contact configuration. It is designed to be mounted on machines and sections of conveyors which cannot be protected by guards and unlike emergency stop pushbuttons. This can be activated from any point along the length of the rope pull to provide robust emergency stop protection. In combination with a dual-channel safety-monitoring relay, this safety rope switch can be used as an emergency stop device and monitored. This product has a guardian line, which has a positive mechanical linkage between the switch contacts and the wire rope of 80m, as well as wire breakage monitoring. Once the rope is pulled, anywhere along its length, the safety contacts are positively opened and the auxiliary contacts are closed. This switches are mechanically latched and can only be returned to the operational condition by pressing the blue reset button. The switch has an electrical current rating of 2.5A at a voltage rating of 250VAC/VDC.

Features and Benefits

• Explosion proof contact blocks • Contact blocks conform to European harmonized standard • Used in European Zone 1, 2, 21, 22 environments (Gas and dust) • Switch mechanism will latch the instant the safety contacts open • Yellow painted die cast aluminium housing • Size of cable entries is M20

Applications

• Oil • Petrochemical • Pharmaceutical • Food processing • Packaging

Certifications

• IEC 60947-5-1 • IEC 60947-5-5 • EN 954-1 • EN 62061 • UL 508 • ISO 13850 • ISO 13849-1 • IP97 rated

Specifications
Attribute Value
Range Guardian Line
Series GLS-Ex
Reset Button Yes
Pole Configuration 4P
Normal State Configuration 2NO/2NC
Mounting Orientation Straight
Maximum Rope Span 80m
Maximum Current 2.5 A
Maximum AC Voltage 250V
Maximum DC Voltage 250V
Housing Material Die Cast Aluminium
Number of Cable Entries 3
Conduit Entry M20
Size of Cable Entries M20
Minimum Operating Temperature -25°C
Dimensions 239 x 63 x 54 mm
Depth 54mm
Length 239mm
IP Rating IP67
Maximum Operating Temperature +80°C
E-Stop Button Yes
Width 63mm
Hazardous Area Certification ATEX
7 In Global stock for delivery within 4 - 8 working days
Price Each
PHP 17,218.19
(exc. VAT)
PHP 19,284.37
(inc. VAT)
units
Per Unit
1 +
PHP17,218.19
Related Products
Idec's rugged series of TWTD switches offers both ...
Description:
Idec's rugged series of TWTD switches offers both variety and durability.The TWTD series also offers either LED or incandescent illumination in full voltage and transformer models.Regardless of your switching needs, the TWTD series provides long lasting, industrial strength quality. Rugged ...
This Idec XW series Emergency Stop switches safe ...
Description:
This Idec XW series Emergency Stop switches safe break action ensures all NC contact are open if the contact block is separated. A unique feature that these 22mm mounting hole E-Stop switches have is that either a push-turn or push-pull ...
The SIRIUS ACT range of push buttons and ...
Description:
The SIRIUS ACT range of push buttons and signalling devices presents an expertly designed selection of push buttons, pilot lights and switches that are intelligent, reliable and physically robust. An innovative Snap-on concept makes the task of installing a unit ...
The Schmersal ZQ700 series rope pull-wire emergency stop ...
Description:
The Schmersal ZQ700 series rope pull-wire emergency stop switch has a 2NC contact configuration. It has a thermoplastic housing and a straight mount orientation. This switch has a rope span of 10m and an electrical current rating of 4A at ...