GLM Cable Switch, Straight, 50m, 2NO/2NC

  • RS Stock No. 826-4091
  • Mfr. Part No. 143052
  • Manufacturer IDEM
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): GB
Product Details

IDEM Guardian Line GLM Mini Safety Rope Pull Switches

The Guardian Line GLM from IDEM are safety rope pull switches with a compact yet robust yellow diecast housing that protect short conveyor lengths of upto 50m and offer a choice of fittings depending on the application. They are designed to be mounted on machines and sections of conveyors which cannot be protected by guards and unlike emergency stop pushbuttons can be activated from any point along the length of rope pull to provide robust emergency stop protection.
In combination with a dual channel safety monitoring relay these safety rope switches can be used as emergency stop devices and monitored for up to Category 4 to EN 954-1 or PLe ISO 13849-1. The Guardian Line conforms to ISO 13850 and IEC 60947-5-5 and has a positive mechanical linkage between the switch contacts and the wire rope, as well as wire breakage monitoring. Once the rope is pulled, anywhere along its length, the safety contacts are positively opened and the auxiliary contacts are closed. The switches are mechanically latched and can only be returned to the operational condition by pressing the blue reset button, as required by ISO 13950.

Switch mechanism will latch the instant the safety contacts open, ISO13850 standard
Upto 30m can be covered using a single switch
Upto 50m can be covered using two switches
Positive break contacts to IEC60947-5-1
Robust yellow diecast housing
IP67 protection
Rugged integral sealing bellows mean they can be high pressure hosed
All internal screws are stainless steel
Easy to wire with 3 x M20 conduit entries
4 pole, either 3NC / 1NO or 2NC / 2NO

Note

826-4101 & 826-4104 have an E-stop and LED.

Standards

IEC 60947-5-1, IEC 60947-5-5, EN 954-1, EN 62061, UL 508, ISO 13850, ISO 13849-1.

Approvals

CE, cULus, TUV.

IDEM Rope Pull Switch

The IDEM GLM series safety rope pull cable switch has 2NO/2NC contact configuration. It is compact, robust yellow and has die-cast housing that protects short conveyor lengths of up to 50m and offer a choice of fittings depending on the application. This switch is designed to be mounted on machines and sections of conveyors which cannot be protected by guards, and unlike emergency stop pushbuttons, it can be activated from any point along the length of the rope pull to provide robust emergency stop protection. In combination with a dual-channel safety monitoring relay, this safety rope switch can be used as an emergency stop device and monitored. This product has a guardian line which has a positive mechanical linkage between the switch contacts and the wire rope, as well as wire breakage monitoring. Once the rope is pulled, anywhere along its length, the safety contacts are positively opened and the auxiliary contacts are closed. This switch is mechanically latched and can only be returned to the operational condition by pressing the blue reset button. The switch has an electrical current rating of 2.5A at a voltage rating of 250VAC/VDC.

Features and Benefits


Switch mechanism will latch the instant the safety contacts open
• Positive break contacts
• Rugged integral sealing bellows mean they can be high pressure hosed
• All internal screws are stainless steel
• Easy to wire with 3 x M20 conduit entries
• 4 pole either 3NC/1NO or 2NC/2NO
• Size of cable entry is M20

Certifications


IEC60947-5-1
• IEC60947-5-5
• EN954-1
• EN62061
• UL508
approved
• ISO 13850
• ISO 13849-1
• CE certified
• TUV approved
• IP67 rated

Specifications
Attribute Value
Range Guardian Line
Series GLM
Reset Button Yes
Pole Configuration 4P
Normal State Configuration 2NO/2NC
Mounting Orientation Straight
Maximum Rope Span 50m
Maximum Current 2.5 A
Maximum AC Voltage 250V
Maximum DC Voltage 250V
Housing Material Die Cast Aluminium
Number of Cable Entries 3
Conduit Entry M20
Size of Cable Entries M20
Width 57mm
IP Rating IP67
Length 205mm
Dimensions 205 x 57 x 57 mm
Minimum Operating Temperature -25°C
Depth 57mm
E-Stop Button No
Maximum Operating Temperature +80°C
1 In Global stock for delivery within 4 - 8 working days
Price Each
PHP 6,004.50
(exc. VAT)
PHP 6,725.04
(inc. VAT)
units
Per Unit
1 +
PHP6,004.50
Related Products
X6 Series emergency stop switches provide the highest ...
Description:
X6 Series emergency stop switches provide the highest level of safety, because the unibody design eliminates the possiblity of the contact blocks falling off the switch.The smooth button is ideal for applications that require extreme cleanliness, such as food processing ...
Even under extreme conditions, such as major temperature ...
Description:
Even under extreme conditions, such as major temperature fluctuations, the SRM rope pull switch continues to work reliably. Rope pull switch manufactured in accordance with DIN EN 60947-5-5 and DIN EN ISO 13850Protection class IP67Stable and durable metal housing (aluminium ...
The Schmersal TVS335 series safety hinge switch has ...
Description:
The Schmersal TVS335 series safety hinge switch has a 1NO/1NC normal state configuration. The conduit entry is M12 and size of cable entries is M12x1.5. It has a contact current rating of 4A at a voltage rating of 230VAC and ...
The SI-HG80 series is unique as the safety ...
Description:
The SI-HG80 series is unique as the safety switch has been designed and integrated into a load bearing hinge body. This helps provide a high degree of protection against intentional defeat and mechanical impact reducing accidents, wear and tear and ...