White Glue Stick

  • RS Stock No. 692-441
  • Mfr. Part No. LM44-12-200-WE0-BGHF-RS
  • Manufacturer Power Adhesives
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): GB
Product Details

Power Adhesives Glue Stick

The Power adhesives white glue stick is a low melt adhesive stick suitable for bonding a wide range of substrates, without the fear of heat damage on sensitive surfaces. Each stick has a length of 200mm and a diameter of 12mm.
It is high-performance, low melt, flame-retardant adhesive with synthetic polymer-based hot melt.
Note:
All constituent parts of these adhesive sticks have been approved by the American FDA under the following section: CFR21, 175-105, 176-180

Features and Benefits

The adhesive has a working time of 35sec from application
Remains tacky for 65seconds
Low viscosity of 1400cps
Short open time

Applications

Balloons

Card
Paper
Polystyrene

Thin films
Wood

Certifications

ANSI/ESD S20.20:2014
BS EN 61340-5-1:2007

Specifications
Attribute Value
Glue Type Glue Sticks
Product Form Stick
Colour White
Cure Time < 5
Maximum Operating Temperature +75°C
Viscosity Low
Minimum Operating Temperature -10°C
437 In Global stock for delivery within 4 - 8 working days
Price 1 Bag of 26
PHP 622.55
(exc. VAT)
PHP 697.26
(inc. VAT)
Bag(s)
Per Bag
Per Unit*
1 - 9
PHP622.55
PHP23.944
10 - 19
PHP609.60
PHP23.446
20 +
PHP600.67
PHP23.103
*price indicative
Related Products
The overtec system (also known as Over-Moulding) is ...
Description:
The overtec system (also known as Over-Moulding) is a low-pressure moulding process that uses thermoplastic moulding resin to achieve high quality sealing and protection of components, faster than 2 component potting resins and far lower capital cost than injection moulding. ...
Transparent hot-melt adhesive for larger areas, solvent-free, 600 ...
Description:
Transparent hot-melt adhesive for larger areas, solvent-free, 600 g (20 sticks), Ø 11 mm, for GluePRO 300 and GluePRO 400 LCD, temperature: 190°C, firm after 60 - 80 seconds, strong bond after approx. 100 - 120 seconds. With its long ...
Special-purpose acrylate adhesive for high ageing and heat ...
Description:
Special-purpose acrylate adhesive for high ageing and heat resistance, solvent-free, 600 g (20 sticks), Ø 11 mm, for GluePRO 400 LCD, temperature: 200°C, firm after a maximum of 15 seconds, strong bond after approx. 60 seconds. Only use with 4.5 ...
One part water resistant synthetic resin emulsion adhesive ...
Description:
One part water resistant synthetic resin emulsion adhesive for general bonding of wood assemblies for non-structural applications. Suitable for internal and protected external applicationsNot suitable for assemblies immersed in water or where there is a continuous static building load.