Cynergy3 Direct Mounting Float Switch, Polypropylene, Direct Load, Float, 500mm

  • RS Stock No. 228-1964
  • Mfr. Part No. RSF14Y050RF
  • Manufacturer Cynergy3
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): GB
Product Details
//media.rs-online.com/t_line/L228196-01.gif
//media.rs-online.com/t_line/LD228196-01.gif
//media.rs-online.com/t_line/LF228196-10.gif
//media.rs-online.com/t_line/LI228196-01.gif

Cynergy3 Float Switch

The Cynergy3 RFS10 series drop float switch is designed to eliminate the problems associated with limescale build-up around the pivot point of the conventional float switch. It has an electrical rating of 240VAC and 0.6A. This particular series is primarily for applications where a high-level condition has to be monitored. This drop float type switch is used for monitoring upper level and the extended drop float type is used for monitoring the lower level in a tank.
Note:
Suitable for signal switching and use with transistorised input/low power, suppressed coil miniature relays. Not suited for any inductive or inrush (e. G. filament lamps) loads.
Supplied with:
0.5m of PVC 16//0.2 cable (polypropylene and polysulfone ETFE) (PPS).

Features and Benefits

Float positioned below the switch in N/C position
Switch opens well before liquid level reaches the float pivot
Pivot out of liquid
High level switch position
Flying lead or M12 connector
Polypropylene material
Fluid SG of 0.70

Applications

Wall kettles
Hot vending machines

Certifications

WRAS approved
UL approved

Specifications
Attribute Value
Device Type Float
Mounting Type Direct Mounting
Switch Output Direct Load
Body Material Polypropylene
Cable Length 500mm
Minimum Operating Temperature -20°C
Maximum Operating Temperature +100°C
Maximum Current 600 mA
Gasket Material Nitrile
7 In Global stock for delivery within 4 - 8 working days
Price Each
PHP 1,274.67
(exc. VAT)
PHP 1,427.63
(inc. VAT)
units
Per Unit
1 - 5
PHP1,274.67
6 - 11
PHP1,243.84
12 +
PHP1,233.94
Related Products
The RS PRO pedestal mount float switch has ...
Description:
The RS PRO pedestal mount float switch has 2 NC DPST-Db contacts. It is used for an open tank or sump. The float switch has a vertical operating position. • Made of polypropylene• Maximum AC voltage 230V (Single Phase), 475V ...
Level control (Emptying or Filling) for conductive liquids. ...
Description:
Level control (Emptying or Filling) for conductive liquids. Sensitivity fixed or adjustable (5…150kΩ)35mm rail mountApplicationsAutomatic car-washesBottling plantBuilding automationConfectionary machines.
Horizontal float switches with a low-cost compact design ...
Description:
Horizontal float switches with a low-cost compact design and WRAS approval. These horizontal float switches consist of a reed switch and a pivoted actuator magnet and can be used for N/O or N/C operation. The switch action can be reversed ...
Ball type float switch. Intrinsically Safe NAMUR OutputCloses ...
Description:
Ball type float switch. Intrinsically Safe NAMUR OutputCloses Floating Up (make switch)Polypropylene FloatDensity: ≥0.6g/cm35 Metres PVC (2 x 0.75mm2) CableCan Only Be Used With a Galvanic Isolation Barrier.