RS Components
Our website uses cookies and similar technologies to provide you with a better service while searching or placing an order, for analytical purposes and to personalise our advertising to you.
 
MPN

WIZnet Inc W5200, Ethernet Controller, 10 Mbps, 100 Mbps MDI/MDIX, SPI, 3.63 V dc, 48-Pin QFN

This image is representative of the product range


Temporarily out of stock - back order for despatch 10/02/2021, delivery within 6 working days from desptach date
Add to Basket

Price Each

PHP255.11

(exc. VAT)

PHP285.72

(inc. VAT)

units

Added

Packaging Options:
RS Stock No.:
758-1048
Mfr. Part No.:
W5200
Manufacturer:
WIZnet Inc
COO (Country of Origin):
KR
unitsPer Unit
1 - 9PHP255.11
10 - 19PHP254.03
20 - 49PHP252.58
50 - 249PHP239.54
250 +PHP233.38

Ethernet Controllers


The 7100A device is an Ethernet controller SoC featuring an 'un-attackable' hardware network engine for preventing network attacks such as flooding, spoofing and injection. The W5200 device does not have the on-chip microcontroller and needs to be connected to an external host via an SPI serial bus.


iMCU W7100A Ethernet Controller SoC
8051-core SoC with hardwired TCP/IP protocol stack, MAC and PHY
Hardwired TCP/IP Protocols: TCP, UDP, ICMP, IPv4 ARP, IGMP, PPPoE
Support for ADSL connection (PPPoE Protocol with PAP/CHAP Authentication mode support)
10BaseT/100BaseTX Ethernet PHY Embedded
Support for Auto-Negotiation (Full/Half Duplex)
Support for Auto-MDIX
Code memory: 2KB Boot ROM, 64KB Flash EPROM
Data Memory: 256B Flash EPROM, 64KB RAM
Memory Lock Function
Up to 4 x 8-bit GPIO Ports (3.3V logic level, 5V tolerant, with Pull-Up/Pull-Down)
Full-duplex UART
Programmable Watchdog Timer
DoCD & trade compatible debugger
Power-Down mode
Power supply: +3.0V to +3.6Vdc
Operating temperature range: -40 to +80°C
Package: QFN64 (RS 758-1045)

iEthernet W5200 Ethernet Controller
Hardwired TCP/IP Protocols: TCP, UDP, ICMP, IPv4 ARP, IGMP, PPPoE
Support for ADSL connection (PPPoE Protocol with PAP/CHAP Authentication mode support)
10BaseT/100BaseTX Ethernet PHY Embedded
Support for Auto-Negotiation (Full/Half Duplex)
Support for Auto-MDIX
Host Communication: High Speed Serial Peripheral Interface (SPI Mode 0,3)
Internal 32KB RAM memory for TCP/IP packet processing
Power-Down mode with Wake-on-LAN
Power supply: +3.0V to +3.6Vdc
Operating temperature range: -40 to +85°C
Package: QFN48 (RS 758-1048)


Ethernet Communications

A range of Ethernet communications controllers, transceivers and switching ICs

AttributeValue
Physical Network Type100BaseTX, 10BaseT
Host InterfaceSPI
Network InterfaceMDI/MDIX
Communication ModeFull Duplex, Half Duplex
Data Rate10 Mbps, 100 Mbps
Loopback ModeInternal
Mounting TypeSurface Mount
Package TypeQFN
Pin Count48
Auto-NegotiationYes
Typical Operating Supply Voltage3.63 V dc
Dimensions7 x 7 x 0.7mm
Maximum Operating Temperature+85 °C
Height0.7mm
Length7mm
Width7mm
Minimum Operating Temperature-40 °C