Siemens DIN Rail Panel Mount Power Supply, 12V dc Output Voltage, 6.5A Output Current

  • RS Stock No. 741-8708
  • Mfr. Part No. 6EP1322-5BA10
  • Manufacturer Siemens
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): RO
Product Details

SITOP Compact Power Supply Unit

The single phase SITOP compact series are power supplies for the lower performance range. Thanks to the space-saving slim design, they are especially suited to distributed applications in control boxes or in small control cabinets. The SITOP compact range have low-power losses throughout the entire load range. The losses are low even during idling, which means they are perfectly suited for applications that are frequently in stand-by mode. The SITOP PSU100C power supplies have a wide-range input for AC and DC networks; plug-in terminals facilitate the electrical connection.

Features and Benefits

• Single phase wide range input from 85 V ac to 264 V ac or 110 V dc to 300 V dc • Small mounting surface due to its slim design
• High efficiency across the entire range
• Low energy consumption during no-load operation or standby
• Adjustable output voltage
• Green LED for "output voltage OK"
• Plug-in connecting terminals for pre-fabricated wiring and fast electrical connection
• Wide temperature range: -20 °C to 70 °C

Product Application Information

To increase the availability, the SITOP compact power supplies can be combined with DC UPS, redundancy and selectivity modules.

Why use a DIN Rail power supply?

The flexibility of DIN Rail mounting systems enables quicker installation time as all devices are able to simply snap onto the metal rails. Power supplies can be easily organised on DIN Rails within enclosed wall boxes or in areas where there is limited space. Similar devices can be mounted next to each other reducing the amount of cabling required. Most power supplies are convection cooled so no cooling fans are needed.
DIN Rail AC to DC power supplies are widely used in many automation, instrumentation and industrial applications. They are used to power a wide variety of DC operated devices including sensors, motors, actuators, solenoids, relays and many more.

Points to consider when buying a DIN Rail power supply

DIN Rail size – There are three common types of DIN Rails. Top Hat, G section and C section. Most have a depth of 7.5 mm or 15 mm. It is wise to check that your power supply is compatible with your DIN Rail. Protection types – It is important to choose a power supply that is protected against either short circuit, overload, over temperature or over voltage. Some power supplies also offer a hiccup mode which will allow the PSU to resume operation once the fault is cleared.
Fixed or adjustable output voltage or current – In test systems it is often convenient to have adjustable DC voltage however in other applications a fixed DC supply may be essential.
Cabling and wiring – The input/output lines to and from the power supply should be as short as possible with a large cross sectional area to help minimise noise and heat.
Efficiency – Choose a power supply that has a high efficiency to minimise the amount of power dissipation, especially if the system relies on convection cooling.
Input voltage range – If the DIN Rail power supply you are buying is to be used in Europe and North America as well as the UK then a universal AC input range of 80 V ac to 264 V ac is required.
Standards – If the power supply is to be used in the USA for controlling electric motors then it will need to comply with Standard UL508, the safety standard for industrial control equipment.

Approvals

CE, cULus, cCSAus, CB, ATEX, cCSAus Class I Div 2, GL, ABS

Siemens 6EP1322-5BA10 Power Supply, 12 V, 6.5 A, 78 W

Specifications
Attribute Value
AC or DC Input Voltage Ac, Dc
AC or DC Output Voltage Dc
Input Voltage 85 → 264V ac
Output Voltage 12 V dc
Output Current 6.5 A
Power Rating 78W
Number of Outputs 1
Electrical Phase 1
Type Switch Mode
Height 80mm
Width 52.75mm
Minimum Temperature -20°C
Maximum Temperature +70°C
Mounting Type DIN Rail Mount
Depth 100mm
Ripple And Noise 200mV Pk-Pk
Load Regulation 1%
7 In Global stock for delivery within 4 - 8 working days
Price Each
PHP 7,252.68
(exc. VAT)
PHP 8,123.00
(inc. VAT)
units
Per Unit
1 +
PHP7,252.68
Related Products
The DRE series from Chinfa is a compact ...
Description:
The DRE series from Chinfa is a compact AC-DC DIN Rail mountable power supply with built-in active PFC.With a high efficiency of between 91% and 93%, the DRE series is cost effective and delivers reliability. • Parallel function (switch selectable) ...
The TBL series is a new range of ...
Description:
The TBL series is a new range of small DIN-rail mount power supplies which have been designed particularly with building and factory automation applications in mind. The ultra-compact low profile cases fit in the standardised wall mounted control panels used ...
The single-phase PSU100Ds range from Siemens are switch ...
Description:
The single-phase PSU100Ds range from Siemens are switch mode power supplies designed for direct wall mounting. The rugged aluminium enclosure can be mounted in different positions via the screw mounting and can be used in applications with high temperature, high ...
Range of metal framed power supplies which covers ...
Description:
Range of metal framed power supplies which covers 15W, 35W, 50W, 100W, 150W and 350W and all are available with 5, 12 or 24VDC output voltages. The S8JC-ZS Switch mode, bottom-mounted power supply is a covered type, terminal block. S8JC-ZS10012C-AC2 ...