- RS Stock No.:
- 708-0101
- Mfr. Part No.:
- VNC2 DEBUG MODULE
- Manufacturer:
- FTDI Chip
4 In Global stock for delivery. NCR Plus within 10 working day(s), rest of PH within 14 working days
10 In Global stock for delivery. NCR Plus within 10 working day(s), rest of PH within 14 working days
Added
Price Each
PHP1,173.96
(exc. VAT)
PHP1,314.84
(inc. VAT)
Units | Per Unit |
1 + | PHP1,173.96 |
- RS Stock No.:
- 708-0101
- Mfr. Part No.:
- VNC2 DEBUG MODULE
- Manufacturer:
- FTDI Chip
Technical data sheets
Legislation and Compliance
- COO (Country of Origin):
- CN
Product Details
Vinculum VNC2 Debug Module
The VNC2 debug module is designed to provide connectivity between the Vinculum-II IDE development software and the debug interface pin on the FTDI Vinculum-II (VNC2) USB host controller device. The VNC2 debug module consists of a miniature board with a USB miniB connector, which provides USB connectivity to Vinculum-II IDE development tools running on a PC. The VNC2 debug module can be used to program and debug firmware running on the VNC2 device. The module connects to the VNC2 device via a 6-way, 2mm pitch, keyed, female connector. The V2DIPx-x, VNC2 based development modules are equipped with a compatible male connector to host the VNC2 debug module. Designers intending to use the module with their own VNC2 based hardware are required to have a similar compatible male connector on their hardware. Details on the debug interface and connectors are outlined in subsequent sections of this document.
One USB mini-B type socket to connect with a PC
On-board FTDI FT232R which provides conversion from USB to serial interface for VNC2 debug port
Low USB bandwidth consumption
USB 2.0 Full Speed compatible
UHCI/OHCI/EHCI host controller compatible
+5V power output to V2DIP-x module (if needed)
USB powered
Programming and debugging for VNC2 IC designs
Power and traffic indicator LEDs
6-way keyed connector to support FTDIs range of V2DIPx-x development modules
-40 to +85℃ operating temperature range
On-board FTDI FT232R which provides conversion from USB to serial interface for VNC2 debug port
Low USB bandwidth consumption
USB 2.0 Full Speed compatible
UHCI/OHCI/EHCI host controller compatible
+5V power output to V2DIP-x module (if needed)
USB powered
Programming and debugging for VNC2 IC designs
Power and traffic indicator LEDs
6-way keyed connector to support FTDIs range of V2DIPx-x development modules
-40 to +85℃ operating temperature range
Specifications
Attribute | Value |
---|---|
For Use With | Viniculum-II IDE |