RS PRO Temperature Data Logger, Battery Powered, IP67

  • RS Stock No. 179-9535
  • Manufacturer RS PRO
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): CN
Product Details

RS PRO USB Temperature Data Logger

Introducing the RS PRO USB Temperature Data Logger. This high-quality standalone unit can measure and store up to 16,000 temperature readings from -35 to +80°C and is also IP 67 rated which means it is resistant against water, dust and debris, making it ideal for use in difficult or inhospitable environments. This data logger unit is compact, portable and incredibly versatile and can easily be set up to view the data by using the built in USB interface, making it easy to access the measured data in situ or later for review.

Features and Benefits:

• This RS PRO temperature data logger has a temperature measurement range of -35 to +80°C (-31 to +176°F)
• This unit can store over 16,000 readings for temperature
• The software is available as a free download here: https://s3.amazonaws.com/lascar_downloads/EasyLogUSB+Installer.exe
• Logging rates are between 10 seconds and 12 hours
• This data logger offers immediate and delayed logging start as well as user-programmable alarm thresholds and status indication via red/green LEDs
• IP67 rated
• Battery powered with an expected life of around 2 years
• RS CAL calibration available 179-9539
• UKAS CAL calibration available 179-9540

Applications:

A data logger is a key piece of equipment for collecting data. It is often used instead of using valuable resources or man-power to manually log and record data and they can be placed in environments that are not always suitable for humans over long periods of time, for example when monitoring refrigeration or chilling units. Data loggers are incredibly useful devices that can offer use in a wide range of applications like:
• Environmental and weather monitoring
• Agricultural and livestock
• Food and drink production
• Building and site monitoring
• HVAC
• Health care
• Accommodation
• Offices
• Warehousing
• Greenhouses

How easy is it to set up the RS PRO Temperature Data Logger?

Easy to install and use, the control software is compatible with 32-bit and 64-bit versions of Windows 7, 8 and 10. The software is used to set up the logger, download, graph and annotate data or export in Excel, PDF and jpeg formats. You can easily set up the logger and view downloaded data by plugging the data logger into a PC’s USB port and using the free software. Data can be printed and exported to other applications for detailed analysis.

The software allows the following parameters to be configured:
• Logger name
• Measurement parameter (°C or °F)
• Logging rate (user selectable between 10 seconds and 12 hours)
• High and low alarms
• Immediate and delayed logging start

Is the battery supplied with the unit?

Yes, the RS PRO Data Logger is supplied as a stand-alone ready-to-use device with the battery and all necessary accessories

How long will the battery last in my data logger?

The battery life depends on your logger's settings, but it should last approximately 2 years (at 25°C and 1-minute logging rate)

Why do the LEDs flash after connecting my logger to a PC?

If the LEDs flash sequentially it may indicate that there is a problem with the battery. This could be a flat battery or a battery where a passivation layer has formed. Leaving the data logger connected to a PC for about 30 seconds and re-installing the batteries to reset the data logger will solve the issue.

If you see the sequential LEDs after disconnecting the logger from a PC then the logging session will not start. You should check the battery condition and then repeat the setup procedure using the PC software.

Can this data logger be used outside?

The logger is protected against ingress from water and dust to IP67 standard when the cap is fitted so can be safely used both inside and outside

What does this RS PRO data logger kit come with?

The full set contains the logger, battery and a wall mount clip for easy installation

Specifications
Attribute Value
Measurement Parameters Temperature
Sensor Type Temperature
Interface Type USB
Maximum Temperature Measurement +80 °C, +176 °F
Power Source Battery
Best Temperature Measurement Accuracy ±1 °C
IP Rating IP67
Minimum Operating Temperature -35°C
Maximum Operating Temperature +80°C
Battery Life 2 yr
Battery Type 1/2 AA
Alarm Yes
Includes Battery
Dimensions 99 x 25 x 23mm
Number of Readings Per Channel 16000
341 In Global stock for delivery within 4 - 8 working days
Price Each
PHP 1,997.00
(exc. VAT)
PHP 2,236.64
(inc. VAT)
units
Per Unit
1 +
PHP1,997.00
Related Products
Tinytag View 2 loggers are equipped with an ...
Description:
Tinytag View 2 loggers are equipped with an LCD display to provide instant indication of temperature, humidity and alarm conditions. The loggers are made with food grade materials and are ideal for use in food processing, retail, fridges and chill ...
This 21CFR-compliant standalone data logger records and displays ...
Description:
This 21CFR-compliant standalone data logger records and displays over 32,000 temperature readings from the supplied thermistor probe. The data logger features an LCD and push-button which allow the user to cycle through the most recent, highest and lowest stored readings. ...
The Lascar EasyLog EL-SGD 70-ATP is a four-channel ...
Description:
The Lascar EasyLog EL-SGD 70-ATP is a four-channel temperature data logger with real-time readings, trend graphing and data analysis tools. It is based on the Lascar PanelPilotACE platform and includes a 7 inch panel mounted colour display with capacitive touch ...
Temperature and humidity data loggers which are ideal ...
Description:
Temperature and humidity data loggers which are ideal for the monitoring of indoor environmental conditions. Single and dual channel temperature and humidity recorders16000 readingsUser programmable logging intervals from 1s to 10 daysDelayed and triggered start options3 stop options – stop ...