Schneider Electric LC1D Series Contactor, 230 V ac Coil, 3-Pole, 25 A, 11 kW, 3NO, 690 V ac

TeSys D Contactors from Schneider Electric combine long mechanical and electrical life to offer a high reliable contactor. The range has been designed for integration in control systems and can be used to create motor starters for any type of application. The TeSys D contactors offer quick simple setup while maintaining compliance with international standards.

• Built-in auxiliary contacts for added switching capability
• Screw connections: IP20 finger-safe terminals with both North American and International terminal markings
• Can be panel mounted with screws or DIN Rail mounted
• Bidirectional peak limiting diode suppressor to protect the coil
• Easily installed accessories
• Flexible control circuit to suit a wide range of applications

Contactor utilisation categories define the current making and breaking values, based on the type of load to be controlled and the operating cycle conditions.

• AC-1: This applies to all AC devices with a power factor of at least 0.95. Example of use: resistive load, heating, distribution.


• AC-3: This applies to squirrel cage motors where breaking occurs while the motor is running. Example of use: all squirrel cage motors, lifts, escalators, conveyors, bucket elevators, compressors, pumps, mixers, air conditioning units.

• Auxiliary contact blocks with serrated wiping action
• Front mount dust tight auxiliary contact blocks
• Pneumatic time delay blocks
• Transient voltage surge suppressors
• Interface modules and electronic timers
• Mechanical latching blocks

Yes the Tesys D range uses linear translation movement that provides double breaking of the poles.

The Schneider Electric LC1D25P7 model is a 3 pole contactor featuring a 230 V ac operating coil, with an AC-3 full load current rating of 25 A.

• IP20-rated front cover protects against electric shocks
• Service life of up to 1.65 million cycles, providing long-term control
• Handles voltages up to 6kV, cutting the risk of damage from power surges
• Compact body dimensions of 45 (W) x 85 (H) x 92mm (D), so easily slots into a busy enclosures

• Manufacturing industry
• Packing plants
• Industrial robotics
• Workshops

This unit clips onto a standard DIN rail, so it's simple to fit without tools. You can also screw it onto a mounting plate to suit the needs of your setup.