TLV3701CDBVT Texas Instruments, Comparator, Push-Pull O/P, 240μs 3 → 15 V 5-Pin SOT-23

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

TLV series Low Voltage Comparators

Comparators, Texas Instruments

Texas Instruments’ range of voltage comparators includes not only conventional single, dual and quad comparator packages but also window comparators and over- & under-voltage supervisors.

Although comparators and operational amplifiers are superficially similar devices their operation in practical applications is very different. Op amps are intended for linear operation accompanied by suitable feedback whereas comparators are tailored for rapid switching and generally operated in open-loop mode. Dedicated voltage comparators have significantly shorter propagation delays and are capable of faster response times under saturated conditions. Most comparators are also more tolerant of high differential input voltages and many have open-collector outputs allowing parallel operation with other devices.

Attribute Value
Comparator Type Low Power
Mounting Type Surface Mount
Package Type SOT-23
Power Supply Type Dual, Single
Output Type Push-Pull
Number of Channels per Chip 1
Typical Response Time 240µs
Pin Count 5
Typical Single Supply Voltage 3 → 15 V
Dimensions 2.9 x 1.6 x 1.15mm
Length 2.9mm
Width 1.6mm
Height 1.15mm
Typical CMRR 88dB
Typical PSRR 105dB
Typical Dual Supply Voltage ±3 V, ±5 V
Maximum Operating Temperature +70 °C
Typical Voltage Gain 120 dB
Minimum Operating Temperature 0 °C
Discontinued product