Leap SU-6000, Memory Programmer for NAND/NOR Flash Memory

  • RS Stock No. 771-8559
  • Mfr. Part No. SU-6000
  • Manufacturer Leap
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

SU-6000 4-Gang NAND/NOR Flash memory programmer

SU-6000 is a newly-designed gang programmer for high-density NAND/NOR Flash memory. It provides the highest speed and stability. Furthermore, for the special application of NAND Flash, it provides Bad Block Skip programming, verifying, master reading and device analysis functions. In addition, the innovative adapter design which lets users change adaptors quickly and save the cost of consumptive materials for mass production.

Support NAND Flash Bad Block Skip programming & verifying on 4 sites simultaneously
Ultra high NAND Flash programming speed: 32M bits/sec
Intelligent NAND FLASH master reading: Bad Block Skip or whole device reading
Auto-detect function: wrong insertion of device, bad connection of pins, etc
Innovative adapter design: Support different packages by changing adaptor
Independent socket circuit: Increase the security and stability.
High speed data transmission: 480M Bytes/minute.
Stand-alone industrial LED start button: Pass, Fail, Work LEDs on each site.
Operating software for mass production: working by project, control programming quantity, yield rate statistics, etc.
User-friendly: flexible for adjusting the operation angle, able to lay the unit horizontally or obliquely.
Built in auto-switching power: Support 100V∼240V AC input.

Contents

Main unit
CD x 1 (Driver and user manual are included)
USB cable
AC power cord
Adaptor screw

PC Based Programmers

Specifications
Attribute Value
Accessory Type Memory Programmer
For Use With NAND/NOR Flash Memory
Interface Serial-SPI, USB 2.0
Discontinued product
Related Products
The SPC5-UDESTK is a USB/JTAG interface to enable ...
Description:
The SPC5-UDESTK is a USB/JTAG interface to enable the debugging and programming of the 32-bit SPC56 and SPC57 microcontrollers for automotive applications. It offers a collection of tools; including source file management, project building and a powerful HLL debugger. It ...
The SPC5-UDESTK is a USB/JTAG interface to enable ...
Description:
The SPC5-UDESTK is a USB/JTAG interface to enable the debugging and programming of the 32-bit SPC56 and SPC57 microcontrollers for automotive applications. It offers a collection of tools; including source file management, project building and a powerful HLL debugger. It ...
The FlashBios is a device Reader/Programmer/Copier supporting CMOS ...
Description:
The FlashBios is a device Reader/Programmer/Copier supporting CMOS EPROMs (2716 to 27C801 family) of 16Kb to 8Mb, parallel EEPROMs (28C16 to 28C040 family) up to 4Mb, parallel FLASH memory (28xxx, 29xxx, 37xxx, 39xxx, 49xxx, etc) of 512Kb to 8Mb, IC ...
Supported devices: EPROM, Paged EPROM, Parallel and Serial ...
Description:
Supported devices: EPROM, Paged EPROM, Parallel and Serial EEPROM, FPGA Configuration PROM, Flash Memory (NOR Flash), BPROM, NVRAM, SPLD, CPLD, EPLD, Firmware HUB, MicrocontrollersSupport 70000 devices 274 IC manufacturersThis Programmer supports reduced number of devices than the SUPERPRO-5004GP, while all ...