Countersinks

Countersink cutter drill bits are designed to fit directly into manual, electric and cordless drill driver attachments and have hexagonal or round shanks. Countersink cutters are used to create a chamfer around rim of a pilot hole enabling the head of a countersunk screw to sit flush. Countersink cutters can also be used to remove the burr left from a drilling or tapping operation.Types of Countersink Cutters
  1. Cross-Hole Countersink Cutter: These have a hole that goes through the side of the cone that provides the cutting edge. These countersink cutters are suitable for deburring and can also be used in soft materials such as wood or plastic to create a countersunk hole. The design of these countersink cutters means that they are free from mechanical vibration or 'chatter' and they also stay on centre.
  2. Fluted Countersink cutter: These have fluted blades that produce a heavy chamfer to create the correct seating for a countersunk-head screw. Countersink cutters are available with six different cutting angles but the most common are 82° and 90°. The number of flutes on the countersink cutter can also vary.
    • Single fluted: These have less chatter or mechanical vibration than multi-fluted and are ideal for using in small holes for general purpose countersinking, chamfering and deburring. These are designed for machine use and light portable work when operating at higher speeds.
    • Three fluted: These are designed for a chatter free performance and are used mainly in portable applications at slower speeds. The design of these countersinks gives them a good centering ability.
    • Four fluted: These have good radial relief
    • Five Fluted: These have a rugged design and the odd number of flutes minimises chatter
    • Six fluted: These are ideal for producing fast shearing cuts
MaterialsThese countersink cutter drill bits are made from HSS (High-Speed Steel) which can withstand high temperatures without losing its hardness.

...
Read more Read less

Filters

Viewing 1 - 20 of 89 products
Results per page
Description Price Head Diameter Countersink Angle Number of Flutes Material Overall Length Shank Diameter Shank Length
RS Stock No. 218-624
BrandRS PRO
PHP2,551.90
Each
units
25mm 90° 3 HSS - - -
RS Stock No. 218-595
BrandRS PRO
PHP742.64
Each
units
12mm 90° 5 HSS - - -
RS Stock No. 218-551
BrandRS PRO
PHP698.87
Each
units
6mm 90° 3 HSS - - -
RS Stock No. 562-634
BrandRS PRO
PHP559.39
Each
units
6mm 90° 5 HSS 45 mm 5 mm 35mm
RS Stock No. 218-589
BrandRS PRO
PHP896.22
Each
units
16mm 90° 5 HSS - - -
RS Stock No. 423-822
BrandRS PRO
PHP1,259.00
Each
units
20.5mm 90° 3 HSS 43 mm 7.15 mm 21.5mm
RS Stock No. 673-8704
BrandRS PRO
PHP585.36
Each
units
10.4mm 90° 3 HSS 50 mm 6 mm 36mm
RS Stock No. 218-630
BrandRS PRO
PHP1,615.12
Each
units
20mm 90° 3 HSS - - -
RS Stock No. 218-602
BrandRS PRO
PHP689.97
Each
units
8mm 90° 5 HSS - - -
RS Stock No. 562-533
BrandRS PRO
PHP951.86
Each
units
10mm 90° 3 HSS 39 mm 6.35 mm 20.5mm
RS Stock No. 423-832
BrandRS PRO
PHP796.06
Each
units
10.4mm 90° 5 HSS 31 mm 7.15 mm 21.5mm
RS Stock No. 215-445
BrandRS PRO
PHP1,523.86
Each
units
15mm 90° - HSS 65 mm 10 mm 37.5mm
RS Stock No. 673-8717
BrandRS PRO
PHP1,311.68
Each
units
16.5mm 90° 3 HSS 63 mm 10 mm 42mm
RS Stock No. 218-573
BrandRS PRO
PHP1,120.42
Each
units
20mm 90° 5 HSS - - -
RS Stock No. 218-646
BrandRS PRO
PHP1,374.00
Each
units
16mm 90° 3 HSS - - -
RS Stock No. 423-876
BrandRS PRO
PHP678.84
Each
units
6.3mm 90° 3 HSS 31 mm 7.15 mm 21.5mm
RS Stock No. 218-668
BrandRS PRO
PHP1,019.37
Each
units
10mm 90° 3 HSS - - -
RS Stock No. 215-489
BrandRS PRO
PHP898.44
Each
units
10mm 90° - HSS 48 mm 8 mm 30.5mm
RS Stock No. 423-826
BrandRS PRO
PHP1,238.97
Each
units
16.5mm 90° 3 HSS 40 mm 7.15 mm 21.5mm
RS Stock No. 215-423
BrandRS PRO
PHP899.92
Each
units
5mm 90° - HSS 45 mm 6 mm 32mm
Related Products
HSS-E countersink with cylinder shaftFor rust-free steels and ...
Description:
HSS-E countersink with cylinder shaftFor rust-free steels and + VA materialsThree cutters with radial rear vent for vibration-free workFor deburring, threading and weighting as per DIN 74.
Designed for drilling clearance holes to European sizes ...
Description:
Designed for drilling clearance holes to European sizes PG7-9-11-13.5-16-21, materials up to 3mm thickSuitable for use in industrial power drills, bench or pedestal drills.
HSS step drill with deburring zone for a ...
Description:
HSS step drill with deburring zone for a better circular cutTiAlN coating, for particularly tough materialsFor burr-free drilling and planing sheet metal, pipes and profilesTwo-sided deburring in one moveNo centre-punching necessary, drill bits do not runConstant cutting angle during the ...
HSS step drill with straight tap, two-edgedTiAlN coating, ...
Description:
HSS step drill with straight tap, two-edgedTiAlN coating, for particularly tough materialsFor burr-free drilling and planing sheet metal, pipes and profilesNo centre-punching necessary, drill bits do not runSuitable for construction steel, CrNi steel, non-ferrous metals, Plexiglas, plastics and wood up ...