End Mills

An end mill is a type of cutting tool that is used in milling applications.
They have cutting edges on the end and sides of the shank enabling them to cut in all directions.
The purpose of an end mill
The end mill remove material by their movement within the milling machine or from the cutter’s shape.
The number of flutes (spirals on the end mill) give different results
• 2 flute allows maximum space for chip ejection and is used for general milling operations
• 3 flute is an excellent choice for slotting, it has a larger cross section and is used in general milling operations
• 4, 5, 6 and 8 flute can improve the surface finish if the feed rate remains the same. A greater number of flutes reduces chip load and produces a much finer finish
End cut types
• Centre cutting end mills have one or more cutting edges at the tip to allow the user to plunge, drill or ramp into a cut.
• Non-Centre cutting end mills have peripheral teeth that allow the user to side cut or contour an external surface.

Shank Types
• End mills with a plain shank are used with a collet style holder and are the most common shank type
• End mills with a Weldon shank have one or two flats with set screws in the holder that tighten on the flanks of flats to hold the mill to prevent it from rotating

Typical applications
End mills are used for profiling milling, face milling, tracer milling, semi-finishing and finishing.

...
Read more Read less

Filters

Viewing 1 - 20 of 88 products
Results per page
Description Price Cutter Diameter Cut Length Number of Flutes Material Overall Length Shank Type Shank Diameter Centre Cutting Diameter Tolerance
RS Stock No. 523-0492
BrandRS PRO
PHP408.09
Each
units
4mm 6.5mm 3 HSCo 32.5 mm Weldon 6 mm - -
RS Stock No. 523-0436
BrandRS PRO
PHP508.80
Each
units
1mm 2mm 3 HSCo 24.5 mm Weldon 6 mm - -
RS Stock No. 523-0458
BrandRS PRO
PHP388.68
Each
units
2mm 3mm 3 HSCo 25.5 mm Weldon 6 mm - -
RS Stock No. 523-0559
BrandRS PRO
PHP408.49
Each
units
3mm 7.5mm 3 HSS 34 mm Weldon 6 mm - -
RS Stock No. 523-0470
BrandRS PRO
PHP364.81
Each
units
3mm 4.5mm 3 HSCo 28 mm Weldon 6 mm - -
RS Stock No. 523-0571
BrandRS PRO
PHP416.58
Each
units
4mm 9.5mm 3 HSS 39 mm Weldon 6 mm - -
RS Stock No. 523-0600
BrandRS PRO
PHP414.56
Each
units
6mm 16mm 3 HSS 48 mm Weldon 6 mm - -
RS Stock No. 523-0521
BrandRS PRO
PHP487.77
Each
units
1.5mm 4mm 3 HSS 28 mm Weldon 6 mm - -
RS Stock No. 523-0537
BrandRS PRO
PHP455.01
Each
units
2mm 4.5mm 3 HSS 29 mm Weldon 6 mm - -
RS Stock No. 523-0543
BrandRS PRO
PHP458.24
Each
units
2.5mm 6.5mm 3 HSS 32 mm Weldon 6 mm - -
RS Stock No. 523-0515
BrandRS PRO
PHP366.13
Each
units
6mm 9.5mm 3 HSCo 36 mm Weldon 6 mm - -
RS Stock No. 523-0464
BrandRS PRO
PHP388.68
Each
units
2.5mm 4mm 3 HSCo 26 mm Weldon 6 mm - -
RS Stock No. 523-0593
BrandRS PRO
PHP438.42
Each
units
5mm 12.5mm 3 HSS 44.5 mm Weldon 6 mm - -
RS Stock No. 523-0565
BrandRS PRO
PHP408.21
Each
units
3.5mm 8.5mm 3 HSS 36.5 mm Weldon 6 mm - -
RS Stock No. 523-0486
BrandRS PRO
PHP388.68
Each
units
3.5mm 5.5mm 3 HSCo 30 mm Weldon 6 mm - -
RS Stock No. 523-0509
BrandRS PRO
PHP408.09
Each
units
5mm 7.5mm 3 HSCo 36 mm Weldon 6 mm - -
RS Stock No. 136-8073
BrandRS PRO
PHP8,502.35
Each
units
8 mm, 10 mm, 12 mm, 16 mm, 20 mm - 4 HSS 100 mm Screwed - Yes BS 122/4
New
RS Stock No. 185-7558
BrandRS PRO
PHP12,876.00
1 Set
Set(s)
3 mm, 4 mm, 6 mm, 8 mm, 10 mm, 12 mm, 14 mm, 16 mm, 18 mm, 20 mm 9.5 mm, 12.5 mm, 16 mm, 18 mm, 21 mm, 24 mm, 28.5 mm, 35 mm, 38 mm 4 - 54 mm, 57 mm, 60.5 mm, 63.5 mm, 66.5 mm, 70 mm, 73 mm, 77 mm, 80 mm, 83.5 mm Screwed 6 mm, 12 mm, 16 mm Yes BS 122/4
RS Stock No. 666-6710
Mfr. Part No.S90410.0
BrandDormer
PHP2,255.35
Each
units
10mm 22mm 4 Solid Carbide 72 mm Plain 10 mm Yes h12
RS Stock No. 666-6693
Mfr. Part No.S9043.0
BrandDormer
PHP919.72
Each
units
3mm 12mm 4 Solid Carbide 38 mm Plain 3 mm Yes h12
Related Products
RS Pro end mill set, designed for cutting ...
Description:
RS Pro end mill set, designed for cutting and shaping various materials. Whether using a DIY mill at home or working at a professional machine shop, end mills are an important part of a serious tool collection. • Screwed shank ...
These slot drills have a parallel shank with ...
Description:
These slot drills have a parallel shank with flats, diameter tolerance e8 (undersize h10), 3 flute, short length, centre cutting, 30° spiral, HSCo 8%. They are to DIN327 form D. Applications include keyway and slot milling, and production of closed ...
A range of standard length and long series ...
Description:
A range of standard length and long series Clarkson Osborn FC3 throw-away milling cutters. Manufactured from High Speed Cobalt steel (HSSE) and intended for use in Clarkson FC3 Holders and adaptors.
HSCo-XP flatted shank for machining profiles and steps, ...
Description:
HSCo-XP flatted shank for machining profiles and steps, as well as finishing operations in most materials. Manufactured from Powder Metallurgy Cobalt Steel for increased wear resistance and tool lifeSuperior edge strength and rigidity resulting in improved surface finish and slot ...