Electrical Installation Testers

Electrical installation testers verify the safety of electrical installations in domestic, commercial and industrial settings. They ensure that fixed wiring is safe and correctly installed to meet relevant local standards and safety requirements. 


Uses of electrical installation testers


You can use electrical installation testers for a variety of tests, including:

  • Insulation-continuity tests – diagnose breakdown of the insulation in various parts of the electrical system such as wires, transformers and motors. The quality of insulation is critical in ensuring uninterrupted and safe functioning of electrical circuits.  
  • Checking RCD devices – check the proper functioning of residual-current devices (RCDs). RCDs are designed to disconnect quickly to mitigate the harm caused from electric shock and to avoid current leaks that may lead to fire and other dangerous situations. 
  • Loop testing – a quick, convenient, and specific method of evaluating an electrical circuit's ability to engage protective devices (circuit breakers, fuses, RCDs). A ground loop determines the effectiveness of protective devices.
  • Resistance measurement of grounding systems – verification tests to ensure that a system's resistance is low enough to provide protection to people, equipment and structures. 

...
Read more Read less

Filters

Viewing 1 - 18 of 18 products
Results per page
Description Price Loop Impedance Test Type Automatic RCD Test RCD Ramp Test Non-Tripping Insulation Test Voltage Maximum Voltage Measurement Test Type Earth Resistance Measurement Downloadable Data Interface Type Continuity Test Current RCD Test Type Remote Switch Mode Test Standards
RS Stock No. 704-0487
Mfr. Part No.1002-415
BrandMegger
PHP89,491.62
Each
units
2 Wire Yes Yes Yes 100 V, 250 V, 500 V, 1000 V 600V Continuity, Wiring Polarity Yes Yes German Mains 15 mA, 200 mA AC Type, DC Selective - BS 7671, IEC 60364, IEC 61010-031, IEC 61010-1, IEC 61010-30, IEC 61557, VDE 0100
RS Stock No. 788-4571
Mfr. Part No.RSET4
BrandMartindale
PHP10,272.08
Each
units
- - - - - - - - - - - - - -
RS Stock No. 117-6666
Mfr. Part No.FLK-1663 SCH
BrandFluke
PHP93,992.07
Each
units
Phase to Earth, Phase to Neutral Yes Yes - 50 V, 100 V, 250 V, 500 V, 1000 V 500V ac/dc Continuity, Frequency, Insulation Resistance, Loop and Line Resistance, Measure Motor Windings, Phase Sequence Test, Prospective Earth Fault Current, Prospective Short Circuit Current, RCD Test, Resistance, Voltage, Wiring Polarity Yes - USB 10mA A/F, AC Type, B/B+, G, S Yes -
RS Stock No. 794-3250
Mfr. Part No.PROINSTALL-200-D
PHP80,542.46
Each
units
3 Wire Yes Yes Yes 100 V, 1000 V, 250 V, 500 V 500V ac - Yes Yes Infrared 200mA AC Selective, DC Selective - BS7671, EN 61557, IEC 60364
RS Stock No. 799-9011
Mfr. Part No.P01157702
PHP287,095.34
Each
units
- No - - - - Current Transformation ratios, Power, Voltage - Yes USB - - - EN 61010-I
RS Stock No. 117-6665
Mfr. Part No.FLK-1662 SCH
BrandFluke
PHP67,857.99
Each
units
Phase to Earth, Phase to Neutral Yes Yes - 100 V, 250 V, 500 V, 1000 V 500V ac/dc Continuity, Frequency, Insulation Resistance, Loop and Line Resistance, Measure Motor Windings, Phase Sequence Test, Prospective Earth Fault Current, Prospective Short Circuit Current, RCD Test, Resistance, Voltage, Wiring Polarity - - - 10mA A/F, AC Type, G, S Yes -
RS Stock No. 712-6023
Mfr. Part No.MI-3125
BrandMetrel
PHP45,652.07
Each
units
3 Wire Yes - Yes - 550V ac Continuity Yes - - - - - -
RS Stock No. 867-5627
Mfr. Part No.M520R
PHP118,993.51
Each
units
- Yes Yes Yes 3700V 500V Wiring Polarity Yes Yes - - AC Type, DC Selective - IEC 60364-6
RS Stock No. 811-1271
Mfr. Part No.M500W
PHP165,582.84
Each
units
- - - - - - - - - - - - - -
RS Stock No. 899-8208
Mfr. Part No.M520T
PHP62,833.23
Each
units
3 Wire Yes Yes Yes 1000V 600V Wiring Polarity Yes - - 15mA AC Type, DC Selective Yes EN 61557, IEC 61557, VDE 0413
RS Stock No. 788-4580
Mfr. Part No.RSET5
BrandMartindale
PHP11,517.18
Each
units
- - - - - - - - - - - - - -
RS Stock No. 899-8205
Mfr. Part No.M503B
PHP102,309.15
Each
units
Phase to Earth, Phase to Neutral - Yes - 3700V 600V Wiring Polarity Yes - - 15mA DC Selective Yes DIN VDE 0100-600, IEC 60364-6
RS Stock No. 136-5806
Mfr. Part No.M520P
PHP147,159.24
Each
units
Line to Earth Yes Yes - 1000V 500V Auto Test, RCD Test, RCD Trip Current, RCD Trip Time Yes Yes Bluetooth - B, B+, G, R - IEC 60364-6, IEC 61851, IEC/EN 61010-1, IEC/EN 61557
RS Stock No. 136-5808
Mfr. Part No.M500Y
PHP227,211.44
Each
units
Line to Earth Yes Yes - 1000V 500V Auto Test, RCD Test, RCD Trip Current, RCD Trip Time Yes Yes Bluetooth - B, B+, G, R - IEC 60364-6, IEC 61851, IEC/EN 61010-1, IEC/EN 61557
RS Stock No. 811-1262
Mfr. Part No.M500P
PHP119,964.00
Each
units
- - - - - - - - - - - - - -
RS Stock No. 136-5807
Mfr. Part No.M500V
PHP160,104.40
Each
units
Line to Earth Yes Yes - 1000V 500V Auto Test, RCD Test, RCD Trip Current, RCD Trip Time Yes Yes Bluetooth - B, B+, G, R - IEC 60364-6, IEC 61851, IEC/EN 61010-1, IEC/EN 61557
RS Stock No. 899-8201
Mfr. Part No.M503A
PHP82,790.64
Each
units
Phase to Earth, Phase to Neutral - Yes - 3700V 600V Wiring Polarity Yes - - 15mA DC Selective Yes DIN VDE 0100-600, IEC 60364-6
RS Stock No. 867-5624
Mfr. Part No.M501C
PHP137,486.36
Each
units
- - - - - - - - - - - - - -
Related Products
Using FieldSense Technology the T6-600 measures voltage up ...
Description:
Using FieldSense Technology the T6-600 measures voltage up to 600 V ac through the open fork, without test lead contact to live voltage.+ Without opening covers or removing wire nuts. On wires up to AWG 4/0 (120 mm2), carrying as ...
The Earth Ground Cable connects to Fluke earth ...
Description:
The Earth Ground Cable connects to Fluke earth ground testers for measuring the ability of the earth ground system or individual electrode to dissipate energy from the site. 50 meter wire and reelTerminates with banana plug and connector to attach ...
Support Accessories:. Multifunction installation testers to verify the ...
Description:
Support Accessories:. Multifunction installation testers to verify the safety of electrical installations in industrial, commercial and domestic applicationsMeet the requirements of IEC 60364, HD 384 and BS 7671 17th Edition wiring regulationsLarge illuminated display with exceptionally wide viewing angleRugged: ...
Meggers padded carry case for use with MFT1700 ...
Description:
Meggers padded carry case for use with MFT1700 and MT1800 series of testers. Manufactured from a hard wearing nylon fabric, featuring a main compartment, pocket under the lid for test leads and an external pocket for cables and accessories. • ...