Related Products
Electrical current is required to turn the magnet ...
Description:
Electrical current is required to turn the magnet ON. Power is removed to turn the magnet OFF. Free leads, two-pole connector, Hirschman connectorThreaded hole/s in rear face of magnetBright nickel plated with machined face.
These devices are designed for supporting or gripping ...
Description:
These devices are designed for supporting or gripping ferromagnetic parts.The maximum retaining force is obtained by contact with flat mild steel parts, with a surface area equal to or greater than the attraction surface, and with a sufficient thickness (equal ...
Operating voltage: 12 or 24VdcBrushed aluminiumCurrent draw: 500mA ...
Description:
Operating voltage: 12 or 24VdcBrushed aluminiumCurrent draw: 500mA at 12Vdc x 2 (at 20°C)Magnetic bond sensor monitor output remotely monitors the door lock or unlock status.Operating temperature: -10 to 55°C (14 to 131°F)Humidity: 0 to 95% non-condensingLock’s surface temperature: ambient ...
Power input: 12Vdc or 24VdcVoltage tolerance: +/-15%Current draw: ...
Description:
Power input: 12Vdc or 24VdcVoltage tolerance: +/-15%Current draw: 125mA at 12Vdc 60mA at 24Vdc (at temperature 20 °C)Holding force: Up to 100lbsOver-ride switchWall mountBlack powder-coat finish.