Terminal Covers

Terminal covers are designed for use with batteries, fuses and transformers as a protective measure against sparks, short circuits and corrosion. They protect workers as well as the equipment, preventing damage to both.


How do terminal covers work?

Terminal covers house the transformer or battery in a protective casing. They work by insulating the conductive parts of the circuit so that sparks cannot fly, and providing a barrier against debris in an industrial setting, or corrosion more generally. Corrosion normally occurs when metals are exposed to moisture in air, and it can significantly weaken the material.


Terminal covers also provide a professional, finished look to a circuit, and prevent people from accidentally touching the fuses or other delicate parts of equipment.


Types of terminal cover

Terminal covers vary mainly by size, according to the transformer or device that they need to accommodate. They may also be made from different materials, including glass reinforced nylon and polyester. Glass reinforced nylon is strong and rigid, whereas polyester is flexible and can be transparent, allowing you to see through to the fuses or connections.


...
Read more Read less

Filters

Viewing 1 - 7 of 7 products
Results per page
Sort by
Description Price For Use With Dimensions Depth Length Width Accessory Type Material
RS Stock No. 504-004
BrandRS Pro
PHP20.01
Each
units
12 VA Transformer, 20 VA Transformer 1.53 x 0.775 x 0.45in 0.45in 1.53in 0.775in Shroud Glass Reinforced Nylon
RS Stock No. 503-928
BrandRS Pro
PHP66.64
Each
units
75 VA Transformer, 100 VA Transformer 1.83 x 0.775 x 0.45in 0.45in 1.83in 0.775in Shroud Glass Reinforced Nylon
RS Stock No. 800-3638
Mfr. Part No.AKT8801
BrandPanasonic
PHP426.69
Each
units
KT Temperature Controller 46.8 x 92 x 6mm 6mm 46.8mm 92mm - -
RS Stock No. 890-8678
Mfr. Part No.FBPC1
BrandSola
PHP2,040.88
Each
units
SBE Encapsulated Industrial Control Transformers - - - - Fuse Holder and Finger Safe Cover Kit -
RS Stock No. 800-3628
Mfr. Part No.AKT4801J
BrandPanasonic
PHP417.80
Each
units
KT Temperature Controller 47.7 x 48 x 26mm 26mm 47.7mm 48mm - -
RS Stock No. 890-8680
Mfr. Part No.IP20
BrandSolaHD
PHP680.14
Each
units
SBE Encapsulated Industrial Control Transformers - - - - Cover Kit -
RS Stock No. 503-912
BrandRS Pro
PHP89.00
Each
units
6 VA Transformer 1.105 x 0.69 x 0.35in 0.35in 1.105in 0.69in Shroud Glass Reinforced Nylon
Related Products
Autowound transformers for step-up or step-down of mains ...
Description:
Autowound transformers for step-up or step-down of mains voltages at 50/60Hz. , Compact construction Full varnish impregnation Fully shrouded Four-hole fixing for permanent installation Terminal blocks with protective covers (except 50VA which has leads) 100% electrical and flash tested (2kV ...
Autowound transformers for step-up or step-down of mains ...
Description:
Autowound transformers for step-up or step-down of mains voltages at 50/60Hz. , Compact construction Full varnish impregnation Fully shrouded Four-hole fixing for permanent installation Terminal blocks with protective covers (except 50VA which has leads) 100% electrical and flash tested (2kV ...
Single-phase control and signalling transformers (50 → 60 ...
Description:
Single-phase control and signalling transformers (50 → 60 Hz - class 1).Active parts protected by cover up to 1000 VA.Mounting on full or perforated platinum, or rail according to power.Direct mounting possible on symmetrical DIN rail up to 250 VA.More ...
The Silver Line series has been designed to ...
Description:
The Silver Line series has been designed to meet the industry standard accepted footprint for open frame, linear power supplies. They have standard screw terminals for easy instillation. They also have a selection of covers for safety consideration. Potential Applications:Industrial ...