O-Ring Tools

O-ring tools are components that help with the installation and functioning of an O-ring. An O-ring is a gasket or seal in the form of a ring with a circular cross section, typically made of rubber and used for swivelling joints.

O-ring gauges

O-ring gauges help to determine the right size of O-ring to use. They have a series of silhouettes to the side of the gauge that identifies small section O-ring sizes. Larger sizes are determined by placing the O-ring around the two halves of the appropriate spindles at the top of the gauge. The slide is then extended and the size number is displayed in a window of the main body of the gauge.

O-ring testers

An O-ring tester is a compact tool that performs a non-destructive field test of an O-ring by releasing a weight that falls to a set distance to indicate the material composition. O-ring testers are typically made from durable stainless steel which allows them to be carried safely in tool boxes.


...
Read more Read less

Filters

Viewing 1 - 2 of 2 products
Results per page
Description Price Type
RS Stock No. 705-8986
BrandRS PRO
PHP11,655.90
Each
units
O-Ring Material Tester
RS Stock No. 705-8961
BrandRS PRO
PHP2,377.76
Each
units
O-Ring Gauge
Related Products
The Volkel No-Go ring gauge M8x1.25 is calibrated ...
Description:
The Volkel No-Go ring gauge M8x1.25 is calibrated at measurement laboratory using the IAC thread scanners. This No-Go thread gauge is marked in red. This thread No-Go ring gauge must not screw into the part by hand by more than ...
The Volkel Go ring gauge M6x1 is calibrated ...
Description:
The Volkel Go ring gauge M6x1 is calibrated at a measurement laboratory using IAC thread scanners. It is possible to manually screw into the entire thread of the part without using excessive force. The reference temperature for part and gauges ...
The Volkel Go ring gauge M12x1.75 is calibrated ...
Description:
The Volkel Go ring gauge M12x1.75 is calibrated at a measurement laboratory using IAC thread scanners. It is possible to manually screw into the entire thread of the part without using excessive force. The reference temperature for part and gauges ...