Bearing Heaters

Bearing heaters are used to quickly and evenly increase the temperature of bearings via induction heating, which makes it easier to mount them onto a shaft. Most bearing heaters come in 230V and 110V versions.

 

What are bearing heaters used for?

Bearing heaters form part of the tools suite used when repairing or building power transmissions. They make it possible to install bearings without having to execute force using hand tools, which can cause damage.


You can also use bearing heaters to heat other components, like gears, pulleys, bushings and shrink rings, as long as the heated parts form a closed electrical circuit. 

 

Types of bearing heaters

Induction coil bearing heaters and portable bearing induction heaters are the main types available.

 

Coil bearing heaters distribute heat evenly onto bearings with an interference fit mounting. The attached coil is on the outside of the heater component, resulting in reduced heating periods and efficient energy consumption.

 

Portable induction heaters are lightweight, quiet and do not magnetise components. These heaters are suitable for bearings of up to 4.5kg.


...
Read more Read less

Filters

Viewing 1 - 5 of 5 products
Results per page
Description Price Supply Voltage Maximum Bore Size Minimum Bore Size
RS Stock No. 497-9584
Mfr. Part No.TIH030M 230V
BrandSKF
PHP184,030.01
Each
units
230V ac 300mm 20mm
RS Stock No. 448-7164
Mfr. Part No.TMBH 1
BrandSKF
PHP133,599.14
Each
units
100 → 240V ac 100mm 20mm
RS Stock No. 732-4726
Mfr. Part No.729659 C
BrandSKF
PHP55,886.09
Each
units
230V ac 100mm -
RS Stock No. 845-9564
Mfr. Part No.TIH100M 230V
BrandSKF
PHP228,229.52
Each
units
200 → 240V 400mm 20mm
RS Stock No. 680-8018
Mfr. Part No.TIH030M/110V
BrandSKF
PHP168,760.81
Each
units
110V ac 300mm 20mm
Related Products
Sealed shielded clamps for heating cylindrical parts such ...
Description:
Sealed shielded clamps for heating cylindrical parts such as press nozzles for injecting thermoplastic materials or any other application requiring a perfect seal on resistance and electrical connection. Sealed brass band heater with folded endsSilver solder sealBand heater connection with ...
These nozzle heaters are hermetically sealed for liquid ...
Description:
These nozzle heaters are hermetically sealed for liquid plastic within the manufacturing process. These types of heaters are used to give long life where normal mica heaters cannot last as long due to process leakages.These heaters are typically used on ...
HVR Pentagon anti-condensation heaters have been designed for ...
Description:
HVR Pentagon anti-condensation heaters have been designed for use where a low wattage heater is required to prevent condensation. They comprise a vitreous enamelled resistor mounted in a sheet steel case and have a removable perforated sheet steel cover. There ...
Introducing the Compact convection heater of temperature classes ...
Description:
Introducing the Compact convection heater of temperature classes T3, T4 and T5 for use in areas with explosion hazard for prevention of formation of condensation and temperature fluctuations. Also benefitting in protection against frost in control and switch cabinets, and ...