Bearing Heaters

Bearing heaters are used to quickly and evenly increase the temperature of bearings via induction heating, which makes it easier to mount them onto a shaft. Most bearing heaters come in 230V and 110V versions.

 

What are bearing heaters used for?

Bearing heaters form part of the tools suite used when repairing or building power transmissions. They make it possible to install bearings without having to execute force using hand tools, which can cause damage.


You can also use bearing heaters to heat other components, like gears, pulleys, bushings and shrink rings, as long as the heated parts form a closed electrical circuit. 

 

Types of bearing heaters

Induction coil bearing heaters and portable bearing induction heaters are the main types available.

 

Coil bearing heaters distribute heat evenly onto bearings with an interference fit mounting. The attached coil is on the outside of the heater component, resulting in reduced heating periods and efficient energy consumption.

 

Portable induction heaters are lightweight, quiet and do not magnetise components. These heaters are suitable for bearings of up to 4.5kg.


...
Read more Read less

Filters

Viewing 1 - 11 of 11 products
Results per page
Description Price Supply Voltage Maximum Bore Size Minimum Bore Size
RS Stock No. 448-7164
Mfr. Part No.TMBH 1
BrandSKF
PHP133,599.14
Each
units
100 → 240V ac 100mm 20mm
RS Stock No. 732-4726
Mfr. Part No.729659 C
BrandSKF
PHP57,003.81
Each
units
230V ac 100mm -
RS Stock No. 845-9564
Mfr. Part No.TIH100M 230V
BrandSKF
PHP218,931.45
Each
units
200 → 240V 400mm 20mm
RS Stock No. 183-2642
Mfr. Part No.BH-02B/UK
BrandConemount
PHP51,726.00
Each
units
- 145mm 10mm
RS Stock No. 183-2643
Mfr. Part No.BH-02C/EUROPE
BrandConemount
PHP56,885.00
Each
units
- 145mm 10mm
RS Stock No. 680-8018
Mfr. Part No.TIH030M/110V
BrandSKF
PHP145,972.89
Each
units
110V ac 300mm 20mm
RS Stock No. 183-2646
Mfr. Part No.BH-02C/UK
BrandConemount
PHP56,885.00
Each
units
- 145mm 10mm
RS Stock No. 183-2647
Mfr. Part No.BH-02S/EUROPE
BrandConemount
PHP80,109.00
Each
units
- 205mm 20mm
RS Stock No. 183-2649
Mfr. Part No.BH-02S/UK
BrandConemount
PHP80,109.00
Each
units
- 205mm 20mm
RS Stock No. 183-2641
Mfr. Part No.BH-02B/EUROPE
BrandConemount
PHP51,726.00
Each
units
- 145mm 10mm
RS Stock No. 497-9584
Mfr. Part No.TIH030M 230V
BrandSKF
PHP184,030.01
Each
units
230V ac 300mm 20mm
Related Products
Introducing the Compact convection heater of temperature classes ...
Description:
Introducing the Compact convection heater of temperature classes T3, T4 and T5 for use in areas with explosion hazard for prevention of formation of condensation and temperature fluctuations. Also benefitting in protection against frost in control and switch cabinets, and ...
Heaters specifically intended for anti-condensation and frost protection ...
Description:
Heaters specifically intended for anti-condensation and frost protection in control and equipment cabinets. All types are supplied with DIN rail mounting hardware. High power to size ratio - 3 power settingsLightweight and easy to fitHarness length 240mmElectrical Protection Class IIIndependent ...
Nimbus D PTC cabinet heaters feature optimised convectional ...
Description:
Nimbus D PTC cabinet heaters feature optimised convectional heat transfer through chimney effect, increasing reliability without switching components. Self-regulating PTC technology allows for even higher efficiency and safety due to temperature self-limitation. Rugged aluminium extrusion profileCompact design ...
The CR/CS series of compact high performance fan ...
Description:
The CR/CS series of compact high performance fan heaters prevent formation of condensation and frost and provides an evenly distributed interior air temperature in enclosures with electric/electronic components. The plastic enclosure provides double insulation and acts as protection against contact. ...