Pneumatic Grippers

Pneumatic grippers are devices designed to hold an object using pneumatic, electric or hydraulic operated jaws or fingers. Grippers can be used as single devices or as a part of pick and place, manufacturing systems. Grippers can be used to pick up/hold various size objects from very small items such as semiconductors to very large items like car chassis or engines. Grippers are frequently added to industrial robots in order to allow robots interactions with objects.

Grippers can be divided into 2 main categories by type of holding objects:
• External – the simplest and most popular method of holding objects. When the gripper jaws close, the closing force of the gripper holds that object.
• Internal – When the access to object’s exterior is required then an internal grip is necessary. Jaws or finger hold the object from the centre. In this case, the opening force of the gripper is used to hold the object.

What to consider when choosing the gripper:
• Shape , orientation and dimensional variation - If the object has two opposing flat surfaces, then 2 jaw parallel gripper is desired since it can handle some dimensional variation. Jaws can also be designed to handle cylindrical objects with the 2 jaw concept. Keep in mind that a retention or encompassing grip requires much less force.
• Weight - Grip force must be adequate to secure the object while the desired operation is performed on the object. The type of jaw design must be part of the force requirement. Keep in mind that you should add a safety factor to the amount of force that you select and air pressure is a factor to keep in mind.
• Accessibility- This applies both to the work being performed on the object and the amount of room for the gripper jaws. If the work is to the exterior of the object then it may require an internal grip. Angular grippers are usually less expensive but require additional space for jaw movement.
• Environmental - Harsh environment or clean room applications require grippers designed for those purposes.
• Retention of the Object - When air pressure is lost, the gripper will relax its grip on the object and the object may be dropped. There are spring assist grippers designed for this type application.

...
Read more Read less

Filters

Viewing 1 - 20 of 63 products
Results per page
Description Price Manufacturer Series Action Number of Fingers Gripping Type Maximum Operating Pressure Absolute Maximum Pressure Cushioning Type Port Connection Weight Size Type
RS Stock No. 245-0003
Mfr. Part No.MHS3-20D
BrandSMC
PHP32,340.30
Each
units
MHS3 Double 3 Parallel 0.6 MPa - - M5 x 0.8 100g -
RS Stock No. 700-7336
Mfr. Part No.MHZ2-10D
BrandSMC
PHP22,118.76
Each
units
MHZ2 Double 2 Parallel 0.7 MPa - - M3 x 0.5 55g -
RS Stock No. 700-7351
Mfr. Part No.MHZ2-6D
BrandSMC
PHP21,084.43
Each
units
MHZ2 Double 2 Parallel 0.7 MPa - - M3 x 0.5 27g -
RS Stock No. 700-7332
Mfr. Part No.MHY2-25D
BrandSMC
PHP26,129.57
Each
units
MHY2 Double 2 Angle 0.6 MPa - - M5 x 0.8 560g -
RS Stock No. 700-7281
Mfr. Part No.MHF2-20D
BrandSMC
PHP40,235.37
Each
units
MHF2 Double 2 Low Profile, Parallel 0.7 MPa - - M5 645g -
RS Stock No. 700-7310
Mfr. Part No.MHS3-25D
BrandSMC
PHP34,154.32
Each
units
MHS3 Double 3 Parallel 0.6 MPa - - M5 x 0.8 140g -
RS Stock No. 700-7294
Mfr. Part No.MHF2-8D
BrandSMC
PHP29,178.35
Each
units
MHF2 Double 2 Low Profile, Parallel 0.7 MPa - - M3 65g -
RS Stock No. 366-3597
Mfr. Part No.MHZ2-10DN
BrandSMC
PHP22,118.76
Each
units
MHZ2 Double 2 Parallel 0.7 MPa - - M3 x 0.5 55g -
RS Stock No. 478-056
Mfr. Part No.MHY2-16D2
BrandSMC
PHP19,327.00
Each
units
MHY2 Double 2 Angle 0.6 MPa - - M5 x 0.8 150g -
RS Stock No. 841-2331
Mfr. Part No.MHZL2-16D
BrandSMC
PHP24,262.10
Each
units
MHZ Double 2 Parallel 0.1 → 0.7 MPa 0.7MPa Not Cushioned M5 x 0.8 135g -
RS Stock No. 700-7320
Mfr. Part No.MHY2-16D
BrandSMC
PHP19,079.42
Each
units
MHY2 Double 2 Angle 0.6 MPa - - M5 x 0.8 150g -
RS Stock No. 841-2372
Mfr. Part No.MHZ2-40D
BrandSMC
PHP54,586.39
Each
units
MHZ Double 2 Parallel 0.1 → 0.7 MPa 0.7MPa Not Cushioned M5 x 0.8 1.3kg -
RS Stock No. 700-7348
Mfr. Part No.MHZ2-20D
BrandSMC
PHP25,692.57
Each
units
MHZ2 Double 2 Parallel 0.7 MPa - - M5 x 0.8 235g -
RS Stock No. 700-7301
Mfr. Part No.MHL2-16D2
BrandSMC
PHP32,008.62
Each
units
MHL2 Double 2 Parallel 0.6 MPa - - M5 x 0.8 935g -
RS Stock No. 700-7314
Mfr. Part No.MHS3-32D
BrandSMC
PHP28,447.44
Each
units
MHS3 Double 3 Parallel 0.6 MPa - - M5 x 0.8 237g -
RS Stock No. 700-7323
Mfr. Part No.MHS3-40D
BrandSMC
PHP29,812.38
Each
units
MHS3 Double 3 Parallel 0.6 MPa - - M5 x 0.8 351g -
RS Stock No. 768-1621
Mfr. Part No.MHW2-32D
BrandSMC
PHP49,620.64
Each
units
MHW2 Double 2 Angle 0.7 MPa - - Rc 1/8 910g -
RS Stock No. 841-2287
Mfr. Part No.MHC2-16S
BrandSMC
PHP14,093.23
Each
units
MHC Single 2 Angle 0.25 → 0.6 MPa 0.6MPa Not Cushioned M5 x 0.8 92g -
RS Stock No. 366-3604
Mfr. Part No.MHZ2-16DN
BrandSMC
PHP22,298.75
Each
units
MHZ2 Double 2 Parallel 0.7 MPa - - M5 x 0.8 115g -
RS Stock No. 841-2381
Mfr. Part No.MHC2-25S
BrandSMC
PHP18,732.81
Each
units
MHC Single 2 Angle 0.25 → 0.6 MPa 0.6MPa Not Cushioned M5 x 0.8 316g -
Related Products
Double actingOperating pressure 1 – 6 barTemperature range ...
Description:
Double actingOperating pressure 1 – 6 barTemperature range 0°C to 60°COpening angle 30°(open), 10°(closed)Holding moment at 5 bar is 0.1Nm (10mm bore), 0.4Nm (16mm), 0.7Nm (20mm), 1.4Nm (25mm)Repeatability of closing position ±0.01mmMaximum operating frequency 180cpmLubrication not required.
The MHF two finger pneumatic gripper compact design ...
Description:
The MHF two finger pneumatic gripper compact design reduces bending moment, improves positional accuracy and saves space. Its double piston gripper construction provides a powerful griping force while remain compact and mounting flexibility is achieved by removing the need for ...
The MHL series from SMC are air grippers ...
Description:
The MHL series from SMC are air grippers ideal for gripping different sized parts. These pneumatic grippers are designed with dual piston construction creating a compact gripper with a large holding force. Wide opening air gripperParallel styleAuto switch capable.
The MHS series parallel style air grippers have ...
Description:
The MHS series parallel style air grippers have been designed for applications requiring a high degree of accuracy in a wide range of environments. They use a wedge cam mechanism for the finger action giving high accuracy. The grippers are ...