Pneumatic Manifold Tube-to-Tube Fittings

Pneumatic technology uses pressured gas to drive some sort of mechanical motion. The most common gas used in pneumatic technology is dry air. The air must be dry as moisture has different compressive qualities. Pneumatic technology is very similar to hydraulic technology, however the fluid used to drive the motion here is always a liquid.

Pneumatic systems are operated using a central pneumatic device (such as an air motor or compressor) and utilise manual or automatic solenoid valves to control the airflow around the system.

Pneumatic systems contain many components, pneumatic manifold tube-to-tube fittings being one example.

What are pneumatic manifold tube-to-tube fittings used for?

Pneumatic manifold tube-to-tube fittings allow a number of tubes to be connected together via a central manifold. They can connect a range of numbers of hoses in a variety of arrangements and orientations.

Types of pneumatic manifold tube-to-tube fittings

Pneumatic manifold tube-to-tube fittings come in a variety of diameters, thread sizes, grades and materials. These adaptors allow the user to change the connections in a system so an assortment of hoses can be attached.


...
Read more Read less

Filters

Viewing 21 - 24 of 24 products
Results per page
Description Price Manufacturer Series Number of Outlet Ports Outlet Port Number of Inlet Ports Inlet Port Material Maximum Operating Pressure Outlet Port - Connection Type Inlet Port - Tube Size Inlet Port - Connection Type Outlet Port - Tube Size Maximum Operating Temperature Minimum Operating Temperature Connection Style
RS Stock No. 218-1612
Mfr. Part No.KM11-08-12-6
BrandSMC
PHP1,176.60
Each
units
KM 6 Push In 8 mm 1 Push In 12 mm PBT 1 MPa Push In 12mm Push In 8mm +60°C -5°C Tube-to-Tube
RS Stock No. 218-1599
Mfr. Part No.KM11-04-08-6
BrandSMC
PHP965.17
Each
units
KM 6 Push In 4 mm 1 Push In 8 mm PBT 1 MPa Push In 8mm Push In 4mm +60°C -5°C Tube-to-Tube
RS Stock No. 400-3299
Mfr. Part No.KM13-04-06-3
BrandSMC
PHP436.21
Each
units
KM 3 Push In 4 mm 1 Push In 6 mm PBT 1 MPa Push In 6mm Push In 4mm +60°C -5°C Tube-to-Tube
RS Stock No. 245-3052
Mfr. Part No.KM11-04-08-10
BrandSMC
PHP1,363.66
Each
units
KM 10 Push In 4 mm 1 Push In 8 mm PBT 1 MPa Push In 8mm Push In 4mm +60°C -5°C Tube-to-Tube
Related Products
In-line excess flow shut-off valves. Compliant with applicable ...
Description:
In-line excess flow shut-off valves. Compliant with applicable safety regulationsTamper-proofLow pressure dropAutomatically re-initialised after fault correctExcellent resistance to corrosionHigh rated air pressure value.
Adaptors for connecting pneumatic hose at right-angles. Bolts ...
Description:
Adaptors for connecting pneumatic hose at right-angles. Bolts made from zinc-passivated steel and plastic bodiesNitrile ’O’ ringsMax operating pressure 20 barTemperature range -20 to 80°C.
With push-in connection : strong construction and reliabilityBody ...
Description:
With push-in connection : strong construction and reliabilityBody in treated brass: excellent resistance to aggressive environments (saline atmosphere and sparks)Optimum flow capacity in small spacesFully orientable in order to facilitate system design and connectionExcellent performance due to their pilot/depilot ...
Shuttle (OR gate) version can be used to ...
Description:
Shuttle (OR gate) version can be used to connect independent signal sources to a common pilot lineAND gate function gives output signal only when both input signals are presentColour coded port identification.