Pneumatic Bulkhead Tube-to-Tube Adaptors

Pneumatic technology uses pressured gas to drive some sort of mechanical motion. The most common gas used in pneumatic technology is dry air. The air must be dry, as moisture has different compressive qualities. Pneumatic technology is very similar to hydraulic technology, however the fluid used to drive the motion here is always a liquid.

Pneumatic systems contain many components, pneumatic bulkhead tube-to-tube adaptors being one example. Pneumatic systems are operated using a central pneumatic device (such as an air motor or compressor) and utilise manual or automatic solenoid valves to control the airflow around the system.

What are pneumatic bulkhead tube-to-tube adaptors used for?

Pneumatic bulkhead tube-to-tube adaptors connect tubes through a panel (the bulkhead). They are designed to provide a reliable seal on both sides with no loss of air. Pneumatic bulkhead tube-to-tube adaptors work well with nylon and polyurethane tubes.

Types of pneumatic bulkhead tube-to-tube adaptors

Pneumatic bulkhead tube-to-tube adaptors come in a variety of diameter, thread size, grade and material. The adaptors allow the user to change the connections in a system so an assortment of hoses can be attached.


...
Read more Read less

Filters

Viewing 1 - 20 of 101 products
Results per page
Description Price Manufacturer Series Type Tube Connection A Tube Connection B Body Material Mounting Hole Diameter Thread Material Finish Chemical Resistant Food Grade Maximum Operating Pressure Tube Connection B - Tube Size Maximum Operating Temperature Minimum Operating Temperature
RS Stock No. 916-0820
BrandRS PRO
PHP157.02
Each (In a Pack of 10)
units
- Straight Push In 4 mm Push In 4 mm Nickel Plated Brass - - Nickel Plated - - 10 bar 4mm +60°C 0°C
RS Stock No. 176-1777
BrandRS PRO
PHP655.701
Each (In a Pack of 10)
units
- Bulkhead Connector Push In 14 mm Push In 14 mm Brass - Brass Nickel Plated - - 20 bar 14mm +80°C -20°C
RS Stock No. 176-2247
BrandRS PRO
PHP289.875
Each (In a Pack of 10)
units
- Bulkhead Connector Push In 10 mm Push In 10 mm Brass - Brass Nickel Plated - - 20 bar 10mm +80°C -20°C
RS Stock No. 176-2246
BrandRS PRO
PHP255.713
Each (In a Pack of 10)
units
- Bulkhead Connector Push In 8 mm Push In 8 mm Brass - Brass Nickel Plated - - - 8mm +80°C -20°C
RS Stock No. 176-1296
BrandRS PRO
PHP230.344
Each (In a Pack of 10)
units
- Bulkhead Connector Push In 4 mm Push In 4 mm Brass - Brass Nickel Plated - - 20 bar 4mm +80°C -20°C
RS Stock No. 916-0836
BrandRS PRO
PHP358.745
Each (In a Pack of 10)
units
- Straight Push In 10 mm Push In 10 mm Nickel Plated Brass - - Nickel Plated - - 10 bar 10mm +60°C 0°C
RS Stock No. 916-0823
BrandRS PRO
PHP167.233
Each (In a Pack of 10)
units
- Straight Push In 6 mm Push In 6 mm Nickel Plated Brass 15mm - Nickel Plated - - 10 bar 6mm +60°C 0°C
New
RS Stock No. 197-7716
BrandRS PRO
PHP3,268.39
1 Bag of 10
Bag(s)
57000 Bulkhead Connector - - Nickel Plated Brass 12mm - - - - 20bar - +80°C -20°C
New
RS Stock No. 197-7717
BrandRS PRO
PHP3,641.92
1 Bag of 10
Bag(s)
57000 Bulkhead Connector - - Nickel Plated Brass 14mm - - - - 20bar - +80°C -20°C
New
RS Stock No. 197-7720
BrandRS PRO
PHP6,583.47
1 Bag of 10
Bag(s)
57000 Bulkhead Connector - - Nickel Plated Brass 22mm - - - - 20bar - +80°C -20°C
RS Stock No. 916-0827
BrandRS PRO
PHP226.862
Each (In a Pack of 10)
units
- Straight Push In 8 mm Push In 8 mm Nickel Plated Brass - - Nickel Plated - - 10 bar 8mm +60°C 0°C
RS Stock No. 144-2632
BrandRS PRO
PHP4,437.29
1 Bag of 10
Bag(s)
- Bulkhead Union Push In 12 mm Push In 12 mm - - Brass Nickel Plated - - 9.9 kgf/cm², 990 kPa 12mm +60°C 0°C
RS Stock No. 176-2245
BrandRS PRO
PHP227.089
Each (In a Pack of 10)
units
- Bulkhead Connector Push In 6 mm Push In 6 mm Brass - Brass Nickel Plated - - - 6mm +80°C -20°C
RS Stock No. 176-1297
BrandRS PRO
PHP254.857
Each (In a Pack of 10)
units
- Bulkhead Connector Push In 6 mm Push In 6 mm Brass - Brass Nickel Plated - - 20 bar 6mm +80°C -20°C
New
RS Stock No. 197-7718
BrandRS PRO
PHP3,984.32
1 Bag of 10
Bag(s)
57000 Bulkhead Connector - - Nickel Plated Brass 14mm - - - - 20bar - +80°C -20°C
New
RS Stock No. 197-7722
BrandRS PRO
PHP9,898.55
1 Bag of 10
Bag(s)
57000 Bulkhead Connector - - Nickel Plated Brass 23mm - - - - 20bar - +80°C -20°C
New
RS Stock No. 197-7721
BrandRS PRO
PHP9,610.62
1 Bag of 10
Bag(s)
57000 Bulkhead Connector - - Nickel Plated Brass 22mm - - - - 20bar - +80°C -20°C
RS Stock No. 176-1775
BrandRS PRO
PHP427.885
Each (In a Pack of 10)
units
- Bulkhead Connector Push In 10 mm Push In 10 mm Brass - Brass Nickel Plated - - 20 bar 10mm +80°C -20°C
RS Stock No. 176-1776
BrandRS PRO
PHP511.425
Each (In a Pack of 10)
units
- Bulkhead Connector Push In 12 mm Push In 12 mm Brass - Brass Nickel Plated - - 20 bar 12mm +80°C -20°C
RS Stock No. 176-2244
BrandRS PRO
PHP214.702
Each (In a Pack of 10)
units
- Bulkhead Connector Push In 4 mm - Brass - Brass Nickel Plated - - - 4mm +80°C -20°C
Related Products
Enots compression fittings are ideal for most general ...
Description:
Enots compression fittings are ideal for most general industrial applications. Manufactured entirely from extruded brass bar or hot brass stampings, they can be used under extreme conditions of pressure and temperature, limited for all practical purposes only by the tubing ...
The Quick Star QSMS range offer a convenient ...
Description:
The Quick Star QSMS range offer a convenient push-in fitting system for compressed air and water with over 1000+ types of standard and function fittings. These high quality, bulkhead tube to tube connectors offer a variety of Metric, G parallel ...
The NPQH range offers a convenient push-in fitting ...
Description:
The NPQH range offers a convenient push-in fitting system with over 1000+ types of standard and function fittings. Reliable pneumatic fittings offer you several benefits which are outlined below. · Effortless, quick and simple push-pull principle installation· Robust, solid nickel-plated ...
Festo NPQP range of push in bulkhead connectors ...
Description:
Festo NPQP range of push in bulkhead connectors that are designed to easily connect tubing and provide a reliable seal. Polypropylene fitting for use in applications with extreme media influences. For pneumatic applications with a temperature range up to 60°C ...