Brass & Copper Solder Fittings

Brass and copper solder fittings are pre-soldered fittings used predominantly in plumbing systems to connect copper pipes.

How do brass and copper solder fittings work?

Brass and copper solder fittings use the principle of capillary action to ensure that, when correctly joined to copper tube, a sufficient layer of lead-free solder is present between tube and fittings to form a mechanically strong, leak proof joint without the need for external solder application. Both the pipes and the fitting should be cleaned with wire wool before use. You can then slide the pipes into the fitting, ensuring that they're pushed all the way in, and apply heat to the rings of solder (indicated by ridges on the outside of the fitting) to secure the joint.

What are brass and copper solder fittings used for?

These fittings can be used to help convey drinking water, light mineral oils, natural or liquid petroleum gases or compressed air. They come in straight, elbow, T-shaped and reducer configurations, depending on your needs.


...
Read more Read less

Filters

Viewing 1 - 5 of 5 products
Results per page
Description Price Fitting Direction Fitting Type Compatible Pipe Size Material Solder Type
RS Stock No. 796-212
Mfr. Part No.TP01R2815
PHP343.96
Each (In a Pack of 2)
units
Straight Reducer Coupler 28 x 15mm Copper Solder Ring
RS Stock No. 797-114
Mfr. Part No.TP2415
PHP86.846
Each (In a Pack of 10)
units
- Equal Tee 15 x 15 x 15mm Copper Solder Ring
RS Stock No. 797-079
Mfr. Part No.TP1215
PHP40.995
Each (In a Pack of 25)
units
90° Elbow 15 x 15mm Copper Solder Ring
RS Stock No. 797-085
Mfr. Part No.TP1222
PHP90.737
Each (In a Pack of 10)
units
90° Elbow 22 x 22mm Copper Solder Ring
RS Stock No. 797-007
Mfr. Part No.TP0115
PHP25.338
Each (In a Pack of 25)
units
Straight Coupler 15 x 15mm Copper Solder Ring
Related Products
Enhanced performance demountable DZR brass fittingsFeatures a stainless ...
Description:
Enhanced performance demountable DZR brass fittingsFeatures a stainless steel grab ringSuitable for use with copper or plastic tubeFor use in the mechanical services sector on hot and cold water applicationsProvides electrical continuity.
High Quality Water Research Advisory Scheme (WRAS) approved ...
Description:
High Quality Water Research Advisory Scheme (WRAS) approved type A brass compression fittings and accessoriesSuitable for connecting copper tubes in accordance with BS2871 part 1These fittings are also suitable for connecting low carbon steel tube, stainless steel tube and many ...
The John Guest system of push-in fittings and ...
Description:
The John Guest system of push-in fittings and pipe, designed for use with air, provide the ideal connection from compressor receiver to air line service components through to complete ring main and take off points. No need to prepare threaded ...
Speedfit® valves, connectors and couplers, made from Acetal ...
Description:
Speedfit® valves, connectors and couplers, made from Acetal and suitable for hot and cold water systems operating up to 65°C. May be used with 15mm copper or polyethylene pipe. Maximum working pressures are 12 bar at 20°C and 6 bar ...